User manual TRICITY DH150W

[. . . ] OPERATING & INSTALLATION INSTRUCTIONS Dishwasher DH 105 Contents For the user Important safety information Description of the appliance The control panel Before use Setting the water softener Rinse aid Using your appliance Loading your appliance Adjusting the height of the upper basket Use of detergent Hints and tips Washing programmes Operating sequence Maintenance and cleaning Internal cleaning Cleaning the filter External cleaning Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and spare parts Customer Care Department Guarantee conditions Hints for test centres Technical specifications Tricity Bendix Service Force 3 4 4 5 5 7 8 8 9 10 11 12 13 14 14 14 15 15 15 15 16 17 17 18 19 19 24 For the installer Installation instructions Water supply connections Water outlet hose connection Electrical connection Adjusting the worktop Fitting under a counter Levelling 20 20 21 22 23 23 23 Guide to use the instruction book The following symbols will be found in the text to guide you throughout the instructions: Safety instructions 1. Step by step Hints and tips Environmental information 2 IND20en Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of your safety. [. . . ] Slide the baskets back into the machine. 10. Switch off the dishwasher 3. Switch off the dishwasher by pressing the On/Off push button and open the door. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. 4. Ensure that the spray arms can rotate freely. Measure out detergent Add the detergent into the dispenser. Close the detergent dispenser lid. 5. 6. 7. Close the dishwasher door Set the programme Turn the programme selector dial clockwise until the number of the programme you wish to select corresponds with the programme marker on the control panel. Important!Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape. 8. Start the programme Depress the On/Off push button. The "Mains On" indicator light will come on and the machine will start. If you wish to interrupt the washing programme at any time press this button again. 13 SEQ17en Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale. Cleaning the central filter (After each wash) Scraps of food may accumulate in the drain filter (A) and should be removed by rinsing the filter under running water. To remove the drain filter - simply pull it out by the handle. Once cleaned, refit the filter by pushing it back to its original position until it engages. MA04 A MA19 Cleaning the large filter (Every month) If necessary clean the large filter (B) on both sides under running water, using a brush. Remove the spray arm by pulling it upwards on one side. Turn the column (C) anticlockwise by 90° and then slide out the filter. MA05 90° B C MA20 3. Once cleaned refit it following the above instructions in reverse order. Ensure the filter is in its original position, the handle of the drain filter should be pointing towards the front of the appliance. MA21 MA18 The dishwasher must not be used without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters is vital to ensure correct operation of the machine. 14 MAN04en External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc. . . . ). Prolonged periods of non-operation If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water. [. . . ] The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted. Important The wires on the mains lead are coloured in accordance with the following code: Green and Yellow -Earth Blue -Neutral Brown -Live If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug. Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter "E" or the earth symbol or coloured green and yellow. [. . . ]