User manual TRICITY EBD9W

[. . . ] You MUST read it carefully before installing or using the appliance. Installation q q q q q q q q q q This appliance is heavy. It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. [. . . ] A chemical reaction can occur between silver cutlery and stainless steel cutlery. Iron and cast iron objects can rust and stain other items. Aluminium tends to go black, copper, pewter and brass tend to stain. If in doubt check with manufacturer of the item. When buying new dishes, ensure that they are dishwasher proof. For best results we recommend the use of Finish detergents, rinse aid and salt. POURING EASY PACK TION DOUBLE AC FOR A BRILLIANT RILLIANT SHINE N EW LIQUID GEL POWDER RINSE C O N C E N T R AT E D D I S H WA S H E R D E T E R G E N T DE15 8 Washing programmes Type of load Degree of soil Required push buttons Recommended quantity of detergent wash Any. Partial load (to be completed later in the day). MAINS ON + RINSE & HOLD prewash Cycle description RINSE & HOLD / / 1 cold rinse (to avoid food scraps from sticking together Hot prewash Main wash up to 65°C 2 warm rinses 1 hot rinse Active drying Cold prewash Main wash up to 65°C 1 cold rinse 1 hot rinse Active drying Hot prewash Main wash up to 50°C 2 cold rinses 1 hot rinse Active drying Main wash up to 50°C 1 cold rinse 1 hot rinse 65° INTENSIVE Heavy soil. Crockery, cutlery, pots and pans MAINS ON + INTENSIVE 20 g 10 g 65° POWER WASH Normal soil. Crockery and cutlery MAINS ON + POWER WASH 25 g 5g * 50° BIO WASH ** 50° QUICK WASH Normal soil. Crockery and cutlery MAINS ON + BIO WASH MAINS ON + QUICK WASH 15 g 15 g Light soil. Crockery, cutlery and party crockery 30 g / * Testing programme for EN 50242 (see "Hints for Test Centres). Close the detergent dispenser lid. 7. Setting and starting the programme Press the push button corresponding to the required programme: the indicator light corresponding to the programme illuminates and the phase indicator lights for that programme start flashing. The start of the programme will occur after about 6 seconds from the last pressure of a programme push button, in this time it is possible to change programme simply pressing the push button of another programme. Once the programme has started the phase indicator lights will turn off except for the phase under way. It is possible to interrupt the programme by: q opening the door q pressing the MAINS ON push button (in this case all the indicator lights turn off) Close the door again or press the MAINS ON push button, the programme will start from the point in which it was interrupted. Important!In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops. Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as steam may escape. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 10 Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale. The dishwasher must not be used without filters. [. . . ] The locknut must be correctly fitted to avoid water leaks. Do not use, for the connection, old hoses which have been used in another appliance. Avoid bends or kinks in the hose which could prevent or slow down the water supply. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. [. . . ]