User manual TRICITY HG211TCW

[. . . ] It is dangerous to alter the specifications or attempt to modify this product in any way. All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. [. . . ] Separate rinse cycle for cotton and linen items Separate spin for cotton and linen items 2 Wash at 95 °C 3 rinses Long spin 4. 5 kg 120 FAST COLOURS 3(*) Wash at 60 °C 3 rinses Long spin Wash at 40 °C 3 rinses Long spin 4 rinses Long spin 4. 5 kg 130 NON- FAST COLOURS 4 5 6 4. 5 kg 115 Rinse 4. 5 kg 58 Long Spin Long spin 4. 5 kg 12 (*) This programme at 60°C with cold water filling and a wash load of 4. 5 kg is the reference programme for the Energy label according to EEC Directive 92/75. Water filling: 40° programmes: cold water filling 50°- 60°programmes: hot and cold filling 95° programmes: hot water filling The programme times are intended as a guide only. The actual time will vary depending on incoming water temperature and pressure. 14 Washing Programmes Programmes for synthetics, mixed fabrics, wool and delicates Wash programme/ Washing symbol Type of laundry Programme dial position Description Possible options RINSE HOLD Max. Synthetic or mixed fabrics, underwear, SYNTHETICS coloured garments, non-shrink shirts, blouses. Short Spin Separate spin for hand washed delicate items Specially tested programme for wool garments bearing the "Pure new wool, nonshrink, machine washable" label. Delicate fabrics, for example curtains. 7 Wash at 50 °C 3 rinses Short spin 2 kg 60 8 Draining of water and short spin 2 kg 6 WOOL 9 Wash at 40 °C 3 rinses Short spin RINSE HOLD 1 kg 50 DELICATES 10 Wash at 40 °C 3 rinses Short spin RINSE HOLD 2 kg 45 Rinse Separate rinse cycle for hand washed synthetic or mixed fabrics For emptying out the last rinse water in programmes with the Rinse Hold option. 11 3 rinses Short spin RINSE HOLD 2 kg 20 Drain 12 Draining of water - 1 The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M9604. 15 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply. To aid cleaning, the top part of the additive compartment should be removed. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits. P1164 P0605 Cleaning the drawer recess Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it. Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO valve avoiding that part of the detergent remains unused at next washing. Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: · pull out the plug from the power socket; · close the water taps; · if necessary, wait until the water has cooled down; · open the pump door; 17 · place a bowl on the floor and place the end of the emergency emptying hose into the bowl. The water should drain by gravity into the bowl. When the bowl is full, put the cap back on the hose. Repeat the procedure until water stops flowing out; · clean the pump if necessary as previously described; · replace the emergency emptying hose in its seat after having plugged it; · screw the pump cover again and close the door. 18 Something Not Working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptom The machine does not start Possible causes The door has not been closed. The plug is not properly inserted in the power socket. There is no supply at the socket The main fuse or the fuse in the plug has blown. The selector dial is not correctly positioned. [. . . ] (23. 6") 30 cm (12") If you intend the drain hose to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic "U-Piece" supplied. In the interest of the environment Washing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being discharged safely into a river. It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution. If you require any further advice please contact your local water authority. Important Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes. Levelling Level the washing machine by raising or lowering the feet. [. . . ]