User manual TRICITY TB56R

[. . . ] OPERATING & INSTALLATION INSTRUCTIONS REFRIGERATOR TB 56 R 1281337 A/T/1-2. (00. ) This instruction book contains safety precautions, hints, information on use and helpful hints and tips. To ensure you use this appliance effective and safely, please read this instruction book carefully before installing or using this appliance and retain for future reference. The symbols below help you to find things more easily: Safety precautions Warnings and Safety information Hints, useful information Environmental information 2 IMPOR TANT S AFET Y INS TR UCTIONS These warnings are provided in the interests of your safety. [. . . ] The shelves can be re-arranged by opening the door to 90°. To allow the air to circulate within the fridge compartment do not cover the wire shelves with paper or trays. Do not store food uncovered. Remove suspect food from your refrigerator and clean, refer to cleaning and maintenance. Energy Saving Advice Do not install the cabinet close to sources of heat, such as a cooker, dishwasher or radiator. Locate the appliance in a cool well ventilated room and make sure that the air openings of the cabinet are not obstructed. Always leave warm food to cool down to room temperature before placing in the fridge. Try to avoid keeping the door open for long periods, or opening the door too frequently as warm air will enter the cabinet, and cause the compressor to switch on unnecessarily often. Ensure there are no obstructions preventing the door from closing properly. It is advisable to periodically clean the refrigeration system at the back of the appliance with a duster or vacuum cleaner. Hints & Tips Food Storage To obtain the best results from your appliance neither hot foods nor liquids which may evaporate, should be placed in the larder compartment. Keep the time between buying chilled food and placing it in your fridge as short as possible. Do not push food together too much, try to allow air to circulate around each item. Maint enance & Cleaning Before any maintenance of cleaning work is carried out DISCONNECT the appliance from the ELECTRICITY SUPPLY. External Cleaning Wash the outer cabinet with warm soapy water. Once or twice a year dust the condenser (black grille) and the compressor at the back of the appliance with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption. Internal Cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5 ml to 0. 5 litre of water). Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol. Regularly check the door seals and wipe clean to ensure they are clean and free from debris. 8 Defrosting Regular defrosting is necessary to ensure efficient operation of the refrigerator. WE RECOMMEND YOU DEFROST THE FREEZER COMPARTMENT FORTNIGHTLY TO ENSURE EFFICIENT OPERATION. Frost will build in the frozen food compartment. This is due to moisture in the air which enters the refrigerator when the door is open and moisture from the stored food. Push the drip tray into the closed position. Push the defrosting button in the centre of the knob of the thermostat control. The frost will melt away and the defrost water will collect in the drip tray. Place a container beneath the tray, and remove the plastic bung. (Remember to replace the bung when the water has drained away. ) Wipe out the interior of the frozen food compartment. Changing the Light Bulb To change the light bulb: Pull out the mains plug. Remove the light bulb cover in the direction of the top arrow, and then in the direction of the bottom arrow. [. . . ] Remove the hinge pin from the bottom of the door. Slot the hinge pin into the hole in the hinge plate and relocate the hinge assembly to the opposite location and refit using the retaining screws. Put the cabinet in the upright position. 13 To reverse the top hinge assembly proceed as follows: Remove the 2 worktop retaining screws from the back of the appliance. Slide the worktop towards the rear and lift clear of the appliance. Remove the 2 upper hinge plate retaining screws. [. . . ]