User manual TRICITY TBC 650 BL

[. . . ] · Do not place or store flammable liquids, highly inflammable materials or fusible objects (e. g. plastic film, plastic, aluminium) on or near the appliance. Safety when cleaning · For cleaning, the appliance must be switched off and cooled down. · For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning equipment is not permitted. How to avoid damage to the appliance · The ceramic glass can be damaged by objects falling onto it. · The edge of the ceramic glass can be damaged by being knocked by the cookware. [. . . ] · Objects that melt and things that boil over can burn onto the ceramic glass and should be removed straightaway. · Do not use the cooking zones with empty cookware or without cookware. Child safety · Small children must be kept away from the appliance. · Only let bigger children work on the appliance under supervision. General safety · The appliance may only be installed and connected by trained, registered service engineers, or competent persons. · Built-in appliances may only be used after they have been built in to suitable built-in units and work surfaces that meet standards. · In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply to prevent the possibility of an electric shock. · Repairs to the appliance must only be carried out by trained registered service engineers. 4 Description of the Appliance Cooking surface layout Single cooking zone 1200W Single cooking zone 1700W Control Knobs Single cooking zone 1700W Residual heat indicator Single cooking zone 1200W Assignment of control knobs 5 Control Knobs The cooking power can be set anywhere between level 1 and 9. 1 9 0 lowest power highest power Off position Residual heat indicator The residual heat indicator lights up, as soon as the corresponding cooking zone is hot. 1 Danger!Af2 ter being switched off, the cooking zones need some time to cool down. Residual heat can be used for melting and keeping food warm. Operating the appliance a cooking is switched it 3 Whenbriefly. This zonecharacteristicon, allmay hum is a of ceramic glass cooking zones and does not impair either the function or the life of the appliance. Selecting the heat setting Heat setting To increase Ring control knob turn clockwise Knob setting 1-9 To reduce switch off turn anti-clockwise 0 9-1 1. When boiling water/searing food, select a high heat setting. 3 Scratches or dark stains on the glass ceramic that cannot be removed do not however affect the functioning of the appliance. 9 What to do if . . . Problem The cooking zones are not functioning. Possible cause The desired heat setting is not set. The fuse in the house's electrical wiring (fuse box) has been tripped. If the fuses trip a number of times, please call an authorised electrician. The residual heat indicator is not displaying anything If the cooking zone is supposed to The cooking zone was only on for a be hot, call your local Service Force short time and is therefore not hot Centre. If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre. 1 Warning!Repairs to the appliance are only to 3 If the appliance has been wrongly operated, be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs. the visit from the service technician or dealer may not take place free of charge, even during the warranty period. 10 Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e. g. Please dispose of the packaging materials in the appropriate container at your local waste disposal facilities. 2 Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. W 11 Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc. ) Installation may only be carried out by a qualified electrician. [. . . ] The minimum distances to other appliances and units are to be observed. A protective floor must be installed under the appliance. The cut surfaces of the worktop are to be protected against moisture using a suitable sealant. The sealant seals the appliance to the work top with no gap. [. . . ]