User manual TRIMBLE ELTA R 50 UPDATE

[. . . ] Instruction Ellta R® 50, , E ta R® 50 Ellta R® 55 and E ta R® 55 and Ellta R® 45 E ta R® 45 U-1 Update An update is necessary if you load a new software version or if you want to change between the "Construction" and "Topo" models of the instrument. [. . . ] Once unpacked the files, the instrument type can no longer be concluded from them. U-2 Update Cable The Update is carried out between and Elta R ® through cable PC This cable is also used for data transfer. The adapter included in the delivery allows the connection to 9 and 25 channel sockets. 708177-9470. 000 U-3 Update Copy the contents of the diskette into a directory of your choice or start the software from the diskette (default). Switch the instrument on and select the item Update. Preparation on the PC & Please follow also the update instructions enclosed z : to end the program u t : to select function j : to confirm selection Configuration Enter your data here. The configuration can be stored subsequently. z : to end mask input j : to end line input Elta 40R The question whether the Elta is in working order is to be answered in any case with YES. j : to confirm U-4 Update Please follow now exactly the instructions given on the screen. j : to select the single steps Elta® R display: Update NEIN JA to go to the menu to start update From now on, the PC software controls the instrument. Update Elta 40R Selection of the language desired (if available) : to end selection of language z U-5 Update Starting Update z to start update This operation takes some minutes comprising the transfer of one file with 30 and 4 files with 514 data records each. The end of the update is acknowledged by clear acoustic signals. [. . . ] Please pay also attention to a perfect cable connection. U-6 [. . . ]