User manual TRIMBLE NOMAD GETTING STARTED GUIDE REV B

[. . . ] GettinG Started Guide Trimble Nomad handheld computer ® TM Limited Warranty & Liability Limitations This product is limited warranted against defects in materials and workmanship for twelve (12) months from the original date of purchase. Nomad accessories and peripherals are limited warranted against defects in materials and workmanship for ninety (90) days from the original date of purchase. If notice is received of such defects during the limited warranty period, the proven defective product(s) will either be repaired or replaced, at the manufacturer's option. Replacement products may be either new or like new. [. . . ] White Balance: Instead of using the automatic mode, you can correct colors suited for the environment (incandescent, sunny or fluorescent). Full Screen: Tap to play the video full screen. Options: Same as described above in the camera section. 18 Working with the Scanner Depending upon the configuration of your unit, it may have an integrated laser 1D bar code scanner. Tap Start / Settings / System / System Information / CardPort to see if Barcode Scanner is listed under the Cardport Devices. Also, the cap will have a clear window with a laser warning label around it. NOTE: Avoid viewing of the direct laser beam. Do not stare into the beam or point directly at eyes. If you do not have your own bar code scanner software to install, there is a basic application called ScanAgent included in the unit. If not on your unit, it may be downloaded from our Web site. Using ScanAgent There are two options for scanning into applications that use text input, such as Excel or Word: button or · Press the arrow Use the Scanner SIP (Soft Input · Panel): Tap on the arrow next to the SIP. Tap on the scan SIP on the screen to activate the scanner. ScanAgent setup To set up ScanAgent and test scanning, tap Start / Settings / System / Scanner Setup. Tap Scan Now to activate the laser and start scanning immediately. The type of bar code symbology, the time of the scan and the current status of the bar code scan test will show in the ScanAgent screen. If the scan fails to decode, try moving closer or farther away from the bar code you are trying to scan. Scan Codes: Check the bar code symbologies you want to scan. Parameters can be changed for each symbology by tapping on Code Parameters or UPC EAN Parameters. Choosing fewer bar code symbologies results in faster scan times. Scan Parameters: Changes can be made to the scan duration, the bar code symbology, or sounds to play when a scan starts or ends. You can also select different . WAV files for sounds. 19 Prefix/Suffix: You can add a prefix before the bar code or suffix after. The suffix can also be changed to send TAB or nothing instead of RETURN after the suffix. For detailed information on these and other settings, please refer to the Software Development Kit provided on our Web site. Settings on your Unit Tap Start / Settings. Tap any of the icons on the Personal, System or Connections tabs to customize the unit settings to your own preferences. Some of the more useful settings are described below. Lock (password) If you want password protection from unauthorized use of your unit, tap Personal / Lock. [. . . ] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]