User manual TRISTAR SR-5240

[. . . ] € Never move the appliance by pulling the cord and make sure the cord can not become entangled. € Do not wind the cord around the appliance and do not bend it. € Allow the appliance to cool down before you clean or store it. € To protect yourself against an electric shock, do not immerse the cord, plug or appliance in the water or any other liquid. [. . . ] Rotate the long spray nozzle in clockwise direction, and align the arrow on the long spray nozzle with the double-line mark on short spray nozzle on the machine body, as shown in figure (I). To remove the long spray nozzle, please rotate the long spray nozzle inversely (counter clockwise) as shown in figure (II), and align the arrow on the spray nozzle with the single-line mark on the machine body. Then the long spray nozzle can be pulled out. (I) (II) For the extended connecting spray nozzle (13) you have to use the same procedure as shown above. (IV) (V) Installation of spray nozzle for door/window (14 & 15) First install the general spray nozzle (14) on short spray nozzle (2), as shown in figure (IV) Install the two small hooks of the spray nozzle for door/ window (15) onto suspension lugs of the general spray nozzle, and then trigger the big hook of the spray nozzle for door/window, and push the spray nozzle for door/window up and clutch (V) it onto the body of the general spray nozzle. EN FUNCTIONS • Disinfection and sterilization: Install the long spray nozzle (12) on the short spray nozzle (2) and aim the spray nozzle at the position that needs disinfection, then press down the steam button. high-temperature steam can kill bacteria. € Cleaning the clothes: Install the general spray nozzle (14) on the short spray nozzle (2), and then mount the towel sleeve (16). Aim it at the hung clothes, and press down the steam button and move the general spray nozzle up and down as well as to the left and to the right at the same time. Then stains can be removed from the clothes. € Cleaning doors and windows: Install the general spray nozzle (14) on the short spray nozzle (2), and then install the spray nozzle for door/window (15) on it. Aim this at the door/window, and press down the steam button and move it up and down as well as to the left and to the right at the same time. Then stains can be removed from the door/window. (III) Install spray with round brush (10) or bent spray nozzle (11) For direct installation on short spray nozzle (2), aim the spray nozzle with round brush or bent spray nozzle at the top of spray nozzle, as shown in figure (III), and push the spray nozzle upwards until it is in position. 5 Instruction manual • Cleaning the floor boards: Install the bent spray nozzle (11) or round spray nozzle (10) on the long spray nozzle (12). For spots on difficult places you can also use the extended connecting spray nozzle (13) . Then aim it at the floor board, and press down the steam button to remove the dirt and stains in wall corners and on the floor. CLEANING • When finished cleaning, unplug the power cord and disconnect the power supply. € Press down the steam button to release the pressure until no steam is injected out. € Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged slowly until no steam comes out. Then make sure the machine cools down for about five minutes. Finally, completely remove the safety cap. [. . . ] € After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs. GUIDELINES FOR PROTECTION OF THE ENVIRONMENT This appliance should not be put into the domestic garbage at the end of its durability, but must be offered at a central point for the recycling of electric and electronic domestic appliances. This symbol on the appliance, instruction manual and packaging puts your attention to this important issue. The materials used in this appliance can be recycled. [. . . ]