User manual TYAN GT20B5502-LE

[. . . ] TYAN GT20 B5502 Service Engineer’s Manual 1 http://www. tyan. com PREFACE Copyright This publication, including all photographs, illustrations, and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any material contained herein, may be reproduced without written consent of manufacturer. ® Copyright 2010 MiTAC International Corporation. TYAN is a registered trademark of MiTAC International Corporation. [. . . ] 47 3. 4. 1 Replacing Expansion Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 3. 4. 2 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 3. 4. 3 Removing the Motherboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 3. 5 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 3. 5. 1 M1008 LED Control Board Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 3. 5. 2 M1008 LED Control Board Connector Pin Definition . . . . . . 53 3. 6 Replacing the System Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 3. 7 Replacing the M1232 HDD Backplane Board . . . . . . . . . . . . . . . . . . . . . . . . 57 3. 7. 1 M1232 HDD Backplane Board Features . . . . . . . . . . . . . . . . . . . . . . . . . 59 3. 7. 2 M1232 Connector Pin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Appendix I: Cable Connection Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Appendix II: FRU Parts Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Appendix III: Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 7 http://www. tyan. com NOTE 8 http://www. tyan. com Chapter 1: Overview 1. 1 About the TYAN GT20-B5502 Congratulations on the purchase of the TYAN GT20-B5502, a highly optimized rack mount barebone system. The GT20-B5502 is designed to support (1) Intel ® Xeon 3400 Series processor and up to 32GB RDIMM or 16GB UDIMM DDR3-800/1066/1333 memory per node. Utilizing advanced technology from Intel®, the GT20-B5502 system provides scalable 32/64-bit computing, high bandwidth memory design, and lightning-fast PCI-E bus capabilities. The GT20-B5502 not only manages today’s IT environments, but also flexibility for future application usage. TYAN® also offers the GT20-B5502 in a version that can support up to four hot-swap hard drives. The GT20-B5502 uses latest chassis designs which features a solid mechanical enclosure and robust features. 17 http://www. tyan. com ID LED LED ID LED State On Off Color Blue Off Description System identified System not identified 18 http://www. tyan. com 1. 5. 4 Motherboard (S5502) Layout The diagram is representative of the latest board revision available at the time of publishing. The board you receive may not look exactly like the above diagram. 19 http://www. tyan. com 1. 5. 5 Jumpers & Connectors Function 4-pin Fan connector 8-pin 4096 fan header USB Front Panel Header Type-A USB Connectors TYFP1 Header COM2 Header Clear CMOS Jumper Chassis Intrusion Jumper COM switch IPMB Connector Enable/Disable BMC jumper PSMI Connector Speaker Header Port80 Header SAS GPIO to Backplane PCH SGPIO 2X10_pin FAN connector LCM Header Jumper/Connector J8/J9/J30/J32/J33 J37/J38/J39/J42 J19/J20 USB3/USB4 J22 J15 JP4 J41 JP1/JP2 J2 J6 J25 JP5 J16 J23 J36 J35 J7 Jumper Legend OPEN - Jumper OFF CLOSED - Jumper ON Without jumper cover With jumper cover 20 http://www. tyan. com 1. 5. 6 System Block Diagram 21 http://www. tyan. com 1. 5. 7 Internal View 1 2 3 4 5 M2091 PCI-E Riser Card Assembly Power Supply System Fan Unit M1232 HDD Backplane Board HDD Cage 22 http://www. tyan. com Chapter 2: Setting Up 2. 0. 1 Before you Begin This chapter explains how to install the CPUs, CPU heatsinks, memory modules, and hard drives. Instructions on inserting add on cards are also given. 2. 0. 2 Work Area Make sure you have a stable, clean working environment. [. . . ] Locate the cooling fans in your system. 2. Unplug the cables connected to the mainboard and lift the fan unit up from the chassis. 54 http://www. tyan. com 3. Follow Step A & B to unlock the fans. Step A Step B 4. Follow Step C & D to take out the old fan and replace with a new one. Step C Step D 55 http://www. tyan. com 5. After replacing the new fans, follow Step A & B in reverse order to lock the fans. Reinstall the fans into the chassis. 6. Connect the fan cables to the motherboard fan connectors. System Fan to S5502 MB System Fan Fan1 Fan2 Fan3 Fan4 Connect to S5502 MB J39 J38 J37 J42 → → → → 56 http://www. tyan. com 3. 7 1. Replacing the M1232 HDD Backplane Board Disconnect all cables connected to M1232 HDD Board. [. . . ]