User manual TYAN S5532-S5532GM4NR-LE

[. . . ] S5532 Version 1. 0a Copyright Copyright © 2013 MiTAC International Corporation. No part of this manual may be reproduced or translated without prior written consent from MiTAC International Corporation. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN® is a trademark of MiTAC International Corporation. Intel® is a trademark of Intel® Corporation. [. . . ] Disabled / Enabled SAS2308 OPROM Enable/disable LSI2308 OPROM in the Chipset. Enabled / Disabled 66 http://www. tyan. com 3. 3. 7 USB Configuration Legacy USB Support Enable USB legacy support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. Enabled / Disabled / Auto USB3. 0 Support Enable/disable USB3. 0 (XHCI) Controller support. Enabled / Disabled XHCI Hand-off This is a workaround for OSes without XHCI hand-off support. The XHCI ownership change should be claimed by XHCI driver. Enabled / Disabled EHCI Hand-off This is a workaround for OSes without DHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. Enabled / Disabled 67 http://www. tyan. com USB Mass Storage Driver Support Enable/disable USB Mass Storage Driver Support. Enabled / Disabled USB transfer time-out The time-out value for Control, Bulk and Interrupt transfers. 20 sec / 10 sec / 5 sec / 1 sec Device reset time-out USB mass storage device Start Unit command time-out. 20 sec / 10 sec / 30 sec / 40 sec Device power-up delay Maximum time the device will take before it properly reports itself to the Host Controller. AUTO uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor. Auto / Manual 68 http://www. tyan. com 3. 3. 8 Hardware Health Configuration Auto Fan Control Auto Fan Control Help. Disabled / Enabled BMC Alert Beep BMC Alert Beep On/Off. On / Off 3. 3. 8. 1 Sensor Data Register Monitoring When you enter the Sensor Data Register Monitoring submenu, you will see the following dialog window pop out. Read only. 69 http://www. tyan. com 70 http://www. tyan. com 3. 3. 9 Super IO Configuration Super IO Chip Read only. 71 http://www. tyan. com 3. 3. 9. 1 Serial Port 1/2 Configuration Serial Port Enable or disable Serial Port (COM). Enabled / Disabled Change Settings Select an optimal setting for Super IO Device. Auto / IO=3F8h; IRQ=4; / IO=3F8h, IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; / IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; / IO=3E8h, IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; / IO=2E8h, IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; 72 http://www. tyan. com 3. 3. 10 Serial Port Console Redirection Console Redirection Console redirection enable or disable. Disabled / Enabled Serial Port for Out-Of-Band Management/Windows Emergency Services (EMS) Console Redirection Console redirection enable or disable. Disabled / Enabled Console Redirection Settings The settings specify how the host computer (which the user is using) will exchange data. [. . . ] TYAN® also ranks high for its commitment to fast and friendly customer ® support through email. By offering plenty of options for users, TYAN serves multiple market segments with the industry's most competitive services to support them. "TYAN's tech support is some of the most impressive we've seen, with great response time and exceptional organization in general" - Anandtech. com Help Resources: 1. See the beep codes section of this manual. [. . . ]