User manual TYAN TEMPEST I5000VS

[. . . ] Tempest i5000VS /// Version 1. 1 S5372 Copyright Copyright © TYAN Computer Corporation, 2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tempest i5000VS are trademarks of TYAN Computer Corporation. Intel, Blackford-VS, and combinations thereof are trademarks of Intel Corporation. [. . . ] PCI 66MHz / Auto / PCI-X 66MHz / PCI-X 100MHz / PCI-X 133MHz 45 4GB PCI Hole Granularity This feature is used to select the granularity of PCI hole for PCI resource. If MTRRs are not enough, we may use this option to reduce the MTRR occupation. 256MB / 512MB / 1. 0GB / 2. 0GB Memory Branch Mode This option is used to select the type of memory operation mode. Interleave / Sequential / Mirror Branch 0 Rank Sparing This option is used to enable/disable Branch 0 rank/DIMM sparing feature. Enabled / Disabled Enhanced x8 Detection This feature is used to enable/disable enhanced x8 DRAM UC error detection. Enabled / Disabled Force ITK Config Clocking This feature is used to enable/disable FBD configuration for ITK test suite. Enabled / Disabled WatchDog Mode This feature allows you to enable the watchdog function. POST: Watchdog timer counting, start at Power on, stop at OS Boot OS: Start at OS Boot Power on: Start at power on Disabled / POST / OS / Power on Watchdog Timer This feature allows you to enable watchdog timer. 2 Mins / 4 Mins / 6 Mins / 8 Mins /10 Mins Enable Multimedia Timer This feature is used to enable/disable Multimedia Timer support. Yes / No Parallel ATA This feature is used to enable the PATA function. Enabled / Disabled Serial ATA This feature is used to enable the SATA function. Enabled / Disabled 46 Native Mode Operation This feature is used to choose Native Mode for ATA. However, certain OS is not supported under Native Mode. Auto / Serial ATA SATA Controller Mode Option This feature is used to select SATA controller mode. In "compatible mode", SATA and PATA drives are auto-detected and placed in Legacy mode. In "Enhanced (non-AHCI) mode", SATA and PATA drives are auto-detected and placed in Native IDE mode. Compatible / Enhanced (non-AHCI) 3. 3. 1. 1 ICH USB Control Sub-Menu These items are used to control the various ICH USB devices. Main PhoenixBIOS Setup Utility Advanced Security Power ICH USB Control [Enabled] [Enabled] [Enabled] [Enabled] Boot Exit Item Specific Help USB ­ Device 29, All Function: USB ­ Device 29, F1, F2 and F3: USB ­ Device 29, F2 and F3: USB ­ Device 29, Function 7: F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values USB Device 29, All Function Enable or Disable all USB devices by setting item to the desired value. Enabled / Disabled USB Device 29, F1, F2 and F3 Enable or Disable these 3 USB functions by setting item to the desired value. Enabled / Disabled USB Device 29, F2 and F3 Enable or Disable these 2 USB functions by setting item to the desired value. Enabled / Disabled USB Device 29, Function 7: Control USB 2. 0 functionality through this Setup Item. Enabled / Disabled 47 3. 3. 1. 2 Slot PCI-E (x4 Port) Sub-Menu These items are used for PCI Express Root Port #1 control options. PhoenixBIOS Setup Utility Advanced Security Power Slot PCI-E (x4 Port) Sub-Menu [Auto] = Yes = x0 = No Main Boot Exit Item Specific Help PCI-E Port 1 Port #1 Enabled Port #1 Width Port #1 Slot Card Detech F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values PCI-E Port 1 This feature is used to enable/disabled the PCI-E root port. 3. 3. 1. 3 Slot PCI-E (x8 Port) Sub-Menu These items are used for PCI Express Port control options. PhoenixBIOS Setup Utility Advanced Security Power Slot PCI-E (x8 Port) Sub-Menu = Yes = x0 = No Main Boot Exit Item Specific Help Port #2 Enabled Port #2 Width Port #2 Slot Card Detech F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values 48 3. 3. 1. 4 A Lan Control Sub-Menu These items allow you to control the LAN devices. PhoenixBIOS Setup Utility Advanced Security Power LAN Control Sub-Menu [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] Main Boot Exit Item Specific Help LAN1 (Gilgal) Option ROM Scan: LAN2 (Gilgal) Option ROM Scan: LAN3 (82551) Option ROM Scan: F1 Help Esc Exit ¡ö ¡ôõ ¡÷ Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values LAN1 (Gigal)/LAN2 (Gigal)/LAN3 (82551) This feature is used to enable/disable the integrated LAN interface. [. . . ] PCI card that allows a RAID card to use the onboard SCSI chip, thus lowering cost of RAID solution ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shift the processor over and down, guiding into the board and locking it into place. 73 Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]