User manual TYAN TEMPEST I5000XT

[. . . ] Tempest i5000XT /// Version 1. 20 S2696 Copyright Copyright © TYAN Computer Corporation, 2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tempest i5000XT are trademarks of TYAN Computer Corporation. Intel, Greencreek, and combinations thereof are trademarks of Intel Corporation. [. . . ] In "compatible mode", SATA and PATA drives are auto-detected and placed in Legacy mode. In "Enhanced (non-AHCI) mode", SATA and PATA drives are auto-detected and placed in Native IDE mode. Compatible / Enhanced (non-AHCI) SATA RAID Enable This item allows you to enable the SATA RAID functionality. Disabled / Enabled SATA AHCI Enable This item allows you to enable the SATA AHCI functionality. Disabled / Enabled If you do not want to install SATA AHCI driver, please set the SATA AHCI mode to Disabled. 47 3. 3. 7 LSI SAS Interface This screen contains the configuration of the LSI SAS interface. PhoenixBIOS Setup Utility Advanced Security Power LSI SAS Interface [Enabled] [Enabled] Main Boot Exit Item Specific Help LSI SAS Controller: Option ROM Scan: F1 Help Esc Exit Select Item Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Integrated SAS Interface This feature is used to enable the LSI SAS controller. Enabled / Disabled Option ROM Scan This feature is used to initialize the device expansion ROM. Enabled / Disabled 48 3. 3. 8 Integrated Network Interface This screen contains the configuration of the integrated network interface. PhoenixBIOS Setup Utility Advanced Security Power Integrated Network Interface [Enabled] [Enabled] [Disabled] Main Boot Exit Item Specific Help LAN Port0: LAN Port1: Option ROM Scan F1 Help Esc Exit Select Item Select Menu -/+ Change Values F9 Setup Defaults Enter Select Sub-Menu F10 Save and Exit LAN Port0/1 These two features are used to configure the onboard LAN controllers. Enabled / Disabled Option ROM Scan This feature is used to initialize the device expansion ROM. Enabled / Disabled 49 3. 3. 9 Integrated Audio Main PhoenixBIOS Setup Utility Advanced Security Power Integrated Audio [Auto] Boot Exit Item Specific Help Integrated Audio F1 Help Esc Exit Select Item Select Menu -/+ Change Values F9 Setup Defaults Enter Select Sub-Menu F10 Save and Exit 3. 3. 10 Integrated 1394 Main PhoenixBIOS Setup Utility Advanced Security Power Integrated 1394 [Enabled] Boot Exit Item Specific Help Integrated 1394 F1 Help Esc Exit Select Item Select Menu -/+ Change Values F9 Setup Defaults Enter Select Sub-Menu F10 Save and Exit 50 3. 3. 11 Integrated USB This screen contains the configuration of the integrated USB. PhoenixBIOS Setup Utility Advanced Security Power Integrated USB [Enabled] [Enabled] [Enabled] Main Boot Exit Item Specific Help Integrated USB1. 1 Integrated USB2. 0 Legacy USB Support F1 Help Esc Exit Select Item Select Menu -/+ Change Values F9 Setup Defaults Enter Select Sub-Menu F10 Save and Exit Integrated USB1. 1 Enable or Disable all USB devices by setting item to the desired value. Enabled / Disabled Integrated USB2. 0 Control USB 2. 0 functionality through this Setup Item. Enabled / Disabled Legacy USB Support This option is used to enable the support for legacy USB. Enabled / Disabled 51 3. 3. 10 I/O Device Configuration Main PhoenixBIOS Setup Utility Advanced Security I/O Device Configuration [Enabled] [3F8] [IRQ 3] [Enabled] [ECP] [378] [IRQ 7] [DMA 3] Boot Exit Item Specific Help Serial port A: Base I/O Address: Interrupt: Parallel port: Mode: Base I/O Address Interrupt: DMA channel: F1 Help Esc Exit Select Item Select Menu -/+ Change Values F9 Setup Defaults Enter Select Sub-Menu F10 Save and Exit Serial Port A This defines how the first serial port is detected and configured. Disabled / Enabled / Auto / OS Controlled Base I/O Address: Set the base I/O address for serial port A/B. 3F8 Interrupt: Set the interrupt for serial port A/B. IRQ3 Parallel Port This defines how the parallel port is detected and configured. Disabled / Enabled / Auto / OS Controlled Mode This field allows the user to select the parallel port mode. In addition to "Output only" and "Bi-directional", there are two faster bidirectional modes available - the ECP (Extended Capabilities Port) and EPP (Enhanced Parallel Port) modes. ECP uses the DMA protocol to achieve data transfer rates of up to 2. 5 Mb/s and provides symmetric bidirectional communication. On the other hand, EPP uses existing parallel port signals to provide asymmetric bidirectional communication. 52 Generally, because of its FIFOs and the DMA channel it uses, ECP is good for large data transfers (useful for scanners and printers). On the other hand, EPP is better with links that switch directions frequently (like parallel port drives). Output only / Bi-directional / EPP / ECP Base I/O Address Set the base I/O address for parallel port. [. . . ] PCI card that allows a RAID card to use the onboard SCSI chip, thus lowering cost of RAID solution ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shift the processor over and down, guiding into the board and locking it into place. 76 Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]