User manual TYAN THUNDER HESL-T

[. . . ] Thunder HEsl-T Manual Revision 1. 01 S2688 Copyright © TYAN Computer Corporation, 2001. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Thunder HEsl-T S2688 are trademarks of TYAN Computer Corporation. Intel, Intel Pentium, combinations thereof are trademarks of Intel Corporation. [. . . ] 360KB, 5 ¼" 1. 2MB, 5 ¼" 720KB, 3 ½" 1. 44MB, 3 ½" (d) 2. 88MB, 3 ½" Disabled Enabled Disabled (d) Defines the floppy drive type. Floppy A Floppy B Diskette Write Protect Floppy Drive Seek Enabled Disabled (d) Toggles write protection. This will be effective only if device is access through BIOS. Toggles floppy drive seeking during POST. 3. 2-D Boot Settings Configuration Options related to startup settings can be altered through the following. Enabled Disabled (d) Enabled (d) Disabled When set to Enabled, some self tests will be skipped during POST. If set to Enabled, OEM logo will be displayed instead of POST messages. Specifies whether NumLock will be on or off during bootup. Will allow continual boot if the keyboard is not attached. Quick Boot Quiet Boot Add-On Rom Display Mode Boot up Num-Lock Boot up CPU Speed PS/2 Mouse Support Typematic Rate System Keyboard Force BIOS (d) Keep Current On (d) Off High (d) Low Enabled (d) Disabled Fast (d) Slow Present (d) Unavailable 23 http://www. TYAN. com Primary Display Parity Check Boot to OS/2 Absent VGA/EGA (d) Color 40x25 Color 80x25 Monochrome) Enabled Disabled (d) Yes No (d) Enabled (d) Disabled Changes default video mode. Leave as is. Wait for F1 if "error" Hit "Del" Message Internal Cache Processor Serial Number System BIOS Cacheable Enabled (d) Disabled Write Back (d) Page Flip Enabled Disabled (d) Enabled (d) Disabled Toggles checking of system memory for corruption. If Enabled, you will have to press F1 for the system to continue booting if an error is detected during POST. Toggles display of pressing DEL key to enter BIOS. Toggles the use of Pentium III serial number. Toggles the use of caching BIOS instructions into RAM for faster processing. 3. 2-E Onboard Device Configuration Options related to onboard devices can be altered through the following. Onboard ATI Video Onboard SCSI Onboard 82559 (1) Onboard 82559 (2) Enabled (d) Disabled Enabled (d) Disabled Enabled (d) Disabled Enabled (d) Disabled Toggles the onboard ATI video graphics. Toggles LAN port 2. 3. 2-F Event Log Configuration Options related to Event Logging can be altered through the following. Event Logging ECC Event Logging Clear All Event Logs View Event Log Mark All Events As Read OK Cancel Enabled Disabled (d) Enabled Disabled (d) Yes No Toggles event logging. If OK, BIOS will clear event log. 24 http://www. TYAN. com 3. 2-G Chipset Options related to the graphics interface can be altered through the following. Cached (d) Disabled Toggles shadowing of video ROM data into RAM for faster execution. Defines how many memory refreshes occur before memory can be written to or read from. Scrubbing is an error correction feature. If enabled, POST will take a few minutes. Leave as Default. C000 to DC00 16K Shadow Write Combining for P6-toPCI Act to Deact Act to Read/Write RAS Precharge Time RA Cycle Delay SDRAM CAS Latency Enabled (d) Disabled 5 Clks 6 Clks (d) 2 Clks 3 Clks (d) 2 Clks 3 Clks (d) 10 (d), 9, 8, 7 Clks CAS 2. 5 CAS 3 (d) Memory Auto Precharge SDRAM Fast Timing Memory Write Posting Fast ECC Enable ISA IO Cycle Delay Enabled (d) Disabled 11-1-1-1 (d) 10-1-1-1 Enabled (d) Disabled Enabled Disabled (d) FULL Delay 1. 5 BCLK (d) Enabled Disabled (d) Scrubbing Enable 3. 2-H PCIPnP Options related to the Plug and Play PCI settings interface can be altered through the following. Yes No (d) Plug & Play OS Toggles the option of letting the OS take care of IRQ routing or the BIOS. [. . . ] ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shift the processor over and down, guiding into the board and locking it into place. 46 http://www. TYAN. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]