User manual TYAN THUNDER I7501 PRO

[. . . ] Thunder i7501 Pro /// Revision 1. 00 S2721-533 Copyright © TYAN Computer Corporation, 2002-2003. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Thunder i7501 Pro S2721-533 are trademarks of TYAN Computer Corporation. [. . . ] This setting toggles the Add-On ROM video display mode. Specifies whether Num-Lock will be on or off during bootup. Will allow continual boot even if the keyboard is not attached. Toggles checking of system memory for corruption. If Enabled, you will have to press F1 for the system to continue booting if an error is detected during POST. Toggles display of pressing DEL key to enter BIOS. Parity Check Wait for F1 if "error" Hit "Del" Message 27 http://www. TYAN. com 3. 6 ­ Super IO Configuration Options related to the IO interface can be altered through the following. Enabled Disabled Auto 3F8, 2F8 3E8, 2E8 Output Only Bi-directional EPP Toggles use of serial ports 1 and or 2. Enabling ports also requires you to enter the I/O address for that port unless you select Auto. These options are dependent on the IRQ and vice versa. Standard one-way protocol for parallel devices. Two-way protocol Enhanced Parallel Port may provide higher bandwidth if an EPP compliant device is used (e. g. Enhanced Compatibility Port may provide higher bandwidth if an ECP compliant device is used (e. g. Sets the interrupt request for the parallel port. (IRQ 7 and IRQ 5 both can be defaults. ) Serial Port 1, 2 Address Parallel Port Address Parallel Port Mode ECP Parallel Port IRQ IRQ 7 IRQ 5 3. 7 ­ Onboard Device Configuration Options related to onboard devices can be altered through the following. Onboard ATI RageXL Video Onboard 82551 Onboard 82546 Onboard SCSI Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Toggles the onboard ATI video graphics. Toggles the onboard SCSI controller. 3. 8­ USB Configuration Options related to USB can be altered through the following. USB Function Legacy USB Support USB Zip Emulation Type USB Beep Message Enabled Disabled Enabled Disabled Auto Enabled Disabled Auto Enabled Disabled Toggles the onboard USB ports. Toggles the use of onboard USB ports in DOS. Toggles Zip drive emulation on USB ports when in use. Toggles USB beep error messaging. 28 http://www. TYAN. com 3. 9 ­ PCIPnP Options related to the Plug and Play PCI settings interface can be altered through the following. Yes No Yes No 32, 64, 96, 128, 160, 192, 224, 248 Yes No Enabled Disabled Toggles the option of letting the OS take care of IRQ routing or the BIOS. Select Yes to let the OS manage IRQ settings. [. . . ] Tyan SMDC is compatible with all IPMI-compliance software as well as Tyan System OperatorTM (TSO) software package. By adding SMDC, Tyan's server board becomes a highly manageable and IPMI compatible system with all the advanced features suggesting in IPMI Spec. More detailed information on Tyan's SMDC card can be found on our website: Http://www. Tyan. com 43 http://www. TYAN. com Appendix IV: Riser Cards Please check with your distributor for these riser cards or check http://www. etyan. com to purchase the desired card(s). 44 http://www. TYAN. com Technical Support If a problem arises with your system, you should turn to your dealer for help firs t. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]