User manual TYAN THUNDER K8QE

[. . . ] Thunder K8QE /// Revision 1. 00 S4885G2NR Copyright © TYAN Computer Corporation, 2005-2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Thunder K8QE are trademarks of TYAN Computer Corporation. [. . . ] Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. 50 http://www. TYAN. com PhoenixBIOS Setup Utility Advanced IRQ3 IRQ4 IRQ5: IRQ7 IRQ9 IRQ10 IRQ11 [Available] [Available] [Available] [Available] [Available] [Available] [Available] Item Specific Help F1: Help ¡üý : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡û ¡ú : Select Screen Enter: Select Sub-Menu F10: Previous Values Feature IRQ3/4/5/7/9/10/11/15 Option Available Reserved Description Reserves the specified IRQ for use by legacy ISA devices. 3. 4. 4 - IDE Configuration Sub-Menu You can use this screen to select options for the IDE Configuration settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Large Disk Access Mode: SMART Device Monitoring: Local Bus IDE adapter: Primary Master Primary Slave Secondary Master Secondary Slave [Dos] [Disabled] [Both] Item Specific Help Indicates a DMA, interrupt, I/O, or memory resource conflict with another device. 51 http://www. TYAN. com F1: Help ¡üý : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡û ¡ú : Select Screen Enter: Select Sub-Menu F10: Previous Values Feature Large Disk Access Mode SMART Device Monitoring Local Bus IDE adapter Option DOS Other Disabled Enabled Both Disabled Primary Secondary Menu Item Menu Item Description Select the IDE access mode. Enable the integrated local bus IDE adapter. Configure the IDE channel. Primary Master/Slave Secondary Master/Slave Primary Master/Slave, Secondary Master/Slave The following screen shows the information of IDE device. PhoenixBIOS Setup Utility Advanced Type: [Auto] Item Specific Help 52 http://www. TYAN. com Multi-Sector Transfers: LBA Mode Control: 32 Bit I/O: Transfer Mode: Ultra DMA Mode: [Disabled] [Disabled] [Disabled] [Standard] [Disabled] F1: Help ¡üý : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡û ¡ú : Select Screen Enter: Select Sub-Menu F10: Previous Values Feature Multi-Sector Transfers Option Disabled Enabled Disabled Description Specify the number of sectors per block for multiple sector transfer. Enabling LBA causes Logical Block Addressing to be used in place of Cylinders, Heads_Sectors. This setting enables or disables 32 bit IDE data transfers. Select the method for moving data to/from the drive. Select the Ultra DMA mode used for moving data to/from the drive. LBA Mode Control Enabled Disabled 32 Bit I/O Enabled Standard Transfer Mode Fast PIO 1 Disabled Ultra DMA Mode Enabled 3. 4. 5 - Floppy Configuration Sub-Menu You can use this screen to select options for the Floppy Configuration settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. 53 http://www. TYAN. com PhoenixBIOS Setup Utility Advanced Legacy Diskette A: Legacy Diskette B: [1. 44/1. 25MB 3 /2''] [Disabled] 1 Item Specific Help Indicates a DMA, interrupt, I/O, or memory resource conflict with another device. F1: Help ¡üý : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡û ¡ú : Select Screen Enter: Select Sub-Menu F10: Previous Values Feature Legacy Diskette A/B Option Disabled 1 360kb 5 /4'' 1 1. 2MB 5 /4'' 1 720kb 3 /2'' 1. 44/1. 25 MB 1 3 /2'' 1 2. 88MB 3 /2'' Description Select floppy type 3. 4. 6 - I/O Device Configuration Sub-Menu You can use this screen to select options for the I/O Device Configuration settings. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. PhoenixBIOS Setup Utility Advanced Serial port A: [Auto] Item Specific Help 54 http://www. TYAN. com Serial port B: Mode: Parallel port: Base I/O address: Mode: Floppy disk controller: Base I/O address [Auto] [Normal] [Auto] [378] [ECP] [Enabled] [Primary] F1: Help ¡üý : Select Item -/+: Change Values F9: Setup Defaults Esc: Exit ¡û ¡ú : Select Screen Enter: Select Sub-Menu F10: Previous Values Feature Serial port A Serial port B Mode Parallel port Mode Floppy disk controller Base I/O address Option Auto Disabled Auto Disabled Normal IR ASK-IR Auto Disabled ECP EPP Enabled Disabled Auto Primary Secondary Description Configure serial port A using options. Set the mode for Serial port B using options. Set the mode for parallel port using options. Configure Floppy disk controller using options. [. . . ] Tyan's website (www. tyan. com) provides easy-to-access resources such as in-depth Linux Online Support sections with downloadable Linux drivers and comprehensive compatibility reports for chassis, memory and much more. With all these convenient resources just a few keystrokes away, users can easily find the latest software and operating system components to keep their systems running as powerful and productive as possible. Tyan also ranks high for its commitment to fast and friendly customer support through email. By offering plenty of options for users, Tyan serves multiple market segments with the industry's most competitive services to support them. [. . . ]