User manual TYAN THUNDER K8S PRO

[. . . ] Thunder K8S Pro /// Revision 1. 02 S2882 Copyright © TYAN Computer Corporation, 2001-2004. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Thunder K8S Pro are trademarks of TYAN Computer Corporation. [. . . ] Allows or restricts the system from giving the VGA adapter an IRQ. This is the default setting and should not be changed unless the VGA card manufacturer requires Palette Snooping to be Enabled. ENABLED: BIOS uses PCI bus mastering for reading / writing to IDE drives. Allows user to reserve a specific IRQ for a legacy device (Note: most hardware devices & OS used do not support manual assigned). Allows user to reserve a specific DMA for a legacy device. Yes Plug & Play OS No PCI Latency Timer 32 64 96 128 160 192 224 248 Ascent Descent PCI Bus Scan Order Allocate IRQ to PCI VGA Yes No Disabled Enabled Palette Snooping PCI IDE Bus Master Disabled Enabled Available Reserved IRQ3 ~ IRQ15 DMA0 ~ 7 Available Reserved 55 http://www. TYAN. com 3. 06 ­ BIOS Boot Settings Menu You can display Boot Setup option by highlighting it using the Arrow ( / ) keys and pressing Enter. The settings are described on the following pages. Main Advanced PCI/PnP BIOS Setup Utility Boot Security Chipset Power Exit Boot Settings Boot Settings Configuration Boot Device Priority Hard Disk Drives Removable Drives ATAPI CDROM Drives Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit 3. 06. 1 ­ Boot Settings Configuration Sub-Menu Use this screen to select options for the Boot Settings Configuration. Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced PCI/PnP BIOS Setup Utility Boot Security Chipset Power Exit Boot Settings Configuration Quick Boot Quiet Boot Add On ROM Display Mode Boot up Num-Lock PS/2 Mouse Support Typematic Rate Floppy Error Report Keyboard Error Report Boot To OS/2 Wait for `F1' If Error Hit `DEL' Message Display Interrupt 19 Capture [Disabled] [Disabled] [Force BIOS] [On] [Enabled] [Fast] [Disabled] [Disabled] [No] [Enabled] [Enabled] [Disabled] Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. Select Screen Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit 56 http://www. TYAN. com Feature Boot Settings Configuration Quick Boot Mode Quiet Boot Add On ROM Display Mode Boot up Num-Lock PS/2 Mouse Support Typematic Rate Keyboard Error Report Floppy Error Report Boot To OS/2 Wait for `F1' If Error Hit `DEL' Message Display Interrupt 19 Capture Option Description Enabled Disabled Disabled Enabled Force BIOS Keep Current On Off Enabled Disabled Fast Slow Disabled Enabled Disabled Enabled No Yes Enabled Disabled Enabled Disabled Disabled Enabled This option allows user bypass BIOS self test during POST. Enable this option to hide BIOS Post messages during POST. Allows user to force BIOS/Option ROM of add on cards to be displayed during quiet boot. Allows user to choose status of PS/2 mouse support. Choose the speed at which keys are repeated. Enable / Disable Keyboards error report. Enable / Disable Keyboards error report. Set this option to yes only if booting to OS/2. Allows user to disable the "Press F1 to Continue" error message when error is detected. Allows user to disable the "Press DEL to enter setup" message during POST. Allows devices (such as network card) to capture INT19 for booting. 57 http://www. TYAN. com 3. 06. 2 ­ Boot Device Priority Sub-Menu Use this screen to select options for the Boot Device Priority. [. . . ] By adding SMDC, Tyan's server board becomes a highly manageable and IPMI compatible system with all the advanced features suggesting in IPMI Spec. More detailed information on Tyan's SMDC card can be found on our website: http://www. tyan. com 77 http://www. TYAN. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased your system from a dealer near you, you can bring your system to them to have it serviced instead of attempting to do so yourself (which can have expensive consequences). [. . . ]