User manual TYAN THUNDER K8W

[. . . ] Thunder K8W Revision 1. 01 S2885 Copyright © TYAN Computer Corporation, 2001-2003. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Thunder K8W are trademarks of TYAN Computer Corporation. [. . . ] +/Tab F1 F10 ESC Change Field Select Field Help Save and Exit Exit Description The Yes setting allows the operating system to change the interrupt, I/O, and DMA settings. Set this option if the system is running Plug and 40 WWW. TYAN. COM No PCI Latency Timer 96 128 160 192 224 248 Yes No Disabled Allocate IRQ to PCI VGA Palette Snooping Enabled Available IRQ3 ~ IRQ15 Reserved Available Reserved Disabled 16K ~64K Disabled C0000 ~ DC000 DMA0 ~ 7 Reserved Memory Size Reserved Memory Address Play aware operating systems. Set No for operating systems that do not meet the Plug and Play specifications. It allows the BIOS to configure all the devices in the system. This setting controls how many PCI clocks each PCI device can hold the bus before another PCI device takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. Allows or restricts the system from giving the VGA adapter an IRQ. This is the default setting and should not be changed unless the VGA card manufacturer requires Palette Snooping to be Enabled. Allows user to reserve a specific IRQ for a legacy device (Note: most hardware devices & OS used do not support manual assigned ) Allows user to reserve a specific DMA for a legacy device Allows user to reserve a specific size in memory for a legacy device Allows user to reserve a specific address in memory for a legacy device 41 WWW. TYAN. COM 3. 04 ­ BIOS Boot Menu You can display Boot Setup option by highlighting it using the Arrow ( / ) keys and pressing Enter. The settings are described on the following pages. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Exit Chipset Power Boot Setting Boot Settings Configuration Boot Device Priority Removable Drives Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. +/Tab F1 F10 ESC Change Field Select Field Help Save and Exit Exit Boot Settings Configuration Sub-Menu Use this screen to select options for the Boot Settings Configuration. Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Exit Chipset Power Boot Settings Configuration Quick Boot Quiet Boot Quick Boot Add On ROM Display Mode Boot up Number-Lock PS/2 Mouse Support Typematic Rate System Keyboard Parity Check Boot To OS/2 Wait for "F1" If Error Hit "Del" Message Display Interrupt 19 Capture [Disabled] [Disabled] [Enabled] [Force BIOS] [On] [Enabled] [Fast] [Present] [Disabled] [No] [Enabled] [Enabled] [Disabled] 42 Use [ENTER], [TAB] or [SHIFT_TAB] to select a field Use [+] or [-] to configure system time. +/Tab F1 F10 ESC Change Field Select Field Help Save and Exit Exit WWW. TYAN. COM Feature Quick Boot Mode Quiet Boot Quick Boot Add On ROM Display Mode Boot up Number-Lock PS/2 Mouse Support Typematic Rate System Keyboard Parity Check Boot To OS/2 Wait for "F1" If Error Hit "Del" Message Display Interrupt 19 Capture Option Enabled Disabled Disabled Enabled Force BIOS Keep Current On Off Enabled Disabled Fast Slow Presen Not-Present Disabled Enabled No Yes Enabled Disabled Enabled Disabled Disabled Enabled Description This option allows user bypass BIOS self test during POST Enable this option to hide BIOS Post messages during POST Allows user to force BIOS/Option ROM of add on cards to be displayed during quiet boot Choose status of keyboard NUM LOCK key Allows user to choose status of PS/2 mouse support Choose the speed at which keys are repeated Allows user to disable all system keyboards Enables system parity check Set this option to yes only if booting to OS/2 Allows user to disable the "Press F1 to Continue" error message when error is detected Allows user to disable the "Press DEL to enter setup" message during POST Allows devices (such as network card) to capture INT19 for booting 43 WWW. TYAN. COM 3. 05 ­ BIOS Security Menu The system can be configured so that all users must enter a password every time the system boots or when BIOS Setup is entered, using either the Supervisor password or User password. The Supervisor and User passwords activate two different levels of password security. If you select password support, you are prompted for a one to six character password. The password does not appear on the screen when typed. If you forget it, you must clear CMOS and reconfigure. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Power Exit Use [ENTER], [TAB] or [SHIFT_TAB] to select a field +/Tab F1 F10 ESC [Disabled] Option Not Installed Installed User Password: Not Installed Installed Change Supervisor Password Change User Password Clear User Password Boot Sector Virus Protection Description If the password has been set, Installed displays. If no password is set, Not Installed displays. [. . . ] The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding it into the board and locking it into place. Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased your system from a dealer near you, you can bring your system to them to have it serviced instead of attempting to do so yourself (which can have expensive consequences). [. . . ]