User manual TYAN THUNDER X

[. . . ] Tyan S1952DLU Thunder X Motherboard User's Manual Revision 1. 0 Copyright © Tyan Computer Corporation, 1998. No part of this manual may be reproduced or translated without prior written consent from Tyan Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective companies including, but not limited to the following. AMI BIOS is a trademark of American Megatrend Incorporated. Windows is a trademark of Microsoft Corporation. [. . . ] The settings for each of these options are Monitor or Ignore. LAN Wake-up When this option is Enabled, the system will wake up when a signal is received on the Wake-on LAN header. In order for this wake up function to work, the system must have been brought up at least past the POST before it was last shut down (i. e. if you turn the system off before the POST, the registry will not be set, and the system will not be able to wake up using this function). This function requires an ATX 2. 01 compliant power supply with 5V standby (STB5V) current of at least 800mA. PC98 Power LED When this option is Enabled, your power LED will turn to yellow when your system is in Suspend mode. Note that if you do not have a two-color LED, your LED will turn off when the system is in Suspend mode if this option is set to Enabled. FAN OFF at Suspend If this option is Enabled, the CPU fan will turn off when the system is in Suspend mode. If Disabled, the CPU fan will remain on while the system is in Suspend mode. The settings are Enabled or Disabled. BIOS S1952DLU Thunder X 3-21 Chapter 3 BIOS Configuration RTC Wake-up If Enabled, this option allows you to set an hour and minute for the system to wake up. The next two fields allow you to choose the wake up time. Note that the time fields will not be available if this option is set to Disabled. In order for this wake up function to work, the system must have been brought up at least past the POST before it was last shut down (i. e. if you turn the system off before the POST, the registry will not be set, and the system will not be able to wake up using this function). The settings are Enabled or Disabled. 3. 5 Plug and Play Setup Choose PCI/Plug and Play Setup from the AMIBIOS Setup screen to display the PCI and Plug and Play Setup options, described below. AMI BIOS EASY SETUP UTILITY Ver. 1. 16 (c)1998 American Megatrends, Inc. All Rights Reserved Advanced Advanced CMOS Setup Advanced Chipset Setup Power Management Setup Plug and Play Setup Peripheral Setup Change Language Setting [ Enter ] [ Enter ] [ Enter ] [ Enter ] [ Enter ] English Setup Help Configure PCI / Plug and Play features Previous Item Next Item Select Menu ESC:Exit Enter:Select F5:Setup Defaults F6:Original Values F10:Save & Exit http://www. tyan. com 3-22 Plug and Play Setup Default Settings Chart Setting Option P lug an d P lay A ware O / S P C I L at enc y T im er (P C I C lo c k s ) P C I V G A P ale tt e S n o o p A llo c a te IR Q to P C I V G A P C I ID E B u s M as te r O ff B o a rd P C I ID E C ard *O f f B o ard P C I ID E P rim ary IR Q *O f f B o ard P C I ID E S ec o nd ary IR Q P C I S lo t 1IR Q P rio rit y P C I S lo t 2 IR Q P rio rity P C I S lo t 3 IR Q P rio rity P C I S lo t 4 IR Q P rio rity D M A C han nel 0 D M A C han nel 1 D M A C han nel 3 D M A C han nel 5 D M A C han nel 6 D M A C han nel 7 IR Q 3 IR Q 4 IR Q 5 IR Q 7 IR Q 9 IR Q 10 IR Q 11 IR Q 12 IR Q 14 IR Q 15 R es erv e d M em o ry S ize *R e s erv ed M e m o ry A dd re s s P C I D ev ic e S earc h O rd er B IO S D ev no de f o r S had o w R A M Optimal Default Fail-Safe Default No 64 D is abled Y es D is abled A ut o D is abled D is abled A ut o A ut o A ut o A ut o P nP P nP P nP P nP P nP P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP D is abled C 800 0 F irs t -Las t D is abled No 64 D is abled Y es D is abled A ut o D is abled D is abled A ut o A ut o BIOS A ut o A ut o P nP P nP P nP P nP P nP P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP P C I/ P nP D is abled C 80 00 F irs t -Las t D is abled * Setting option is not selectable S1952DLU Thunder X 3-23 Chapter 3 BIOS Configuration Plug and Play Aware O/S Set this option to Yes to inform AMIBIOS that the operating system can handle plug and Play (PnP) devices. PCI Latency Timer (PCI Clocks) This option specifies the latency timings (in PCI clocks) for PCI devices installed in the PCI expansion slots. The settings are 32, 64, 96, 128, 160, 192, 224, or 248. PCI VGA Palette Snoop When this option is set to Enabled, multiple VGA devices operating on different buses can handle data from the CPU on each set of palette registers on every video device. Bit 5 of the command register in the PCI device configuration space is the VGA Palette Snoop bit (0 is disabled). For example, if there are two VGA devices in the computer (one PCI and one ISA) and this field is set for: Se tting Disabled Enabled De s cription Data read and written by the CPU is only directed to the PCI VGA device's palette registers. Data read and written by the CPU is directed to the both the PCI VGA device's palette registers and the ISA VGA device palette registers, permitting the palette registers of both devices to be identical. This option must be set to Enabled if any ISA adapter card installed in the system requires VGA palette snooping. [. . . ] In Sleep/Suspend mode, all devices except the CPU shut down. SRAM Static RAM, unlike DRAM, does not need to be refreshed in order to prevent data loss. Thus, it is faster, and more expensive. In Standby mode, the video and fixed disk drive shut down; all other devices operate normally. UltraDMA/33 is a fast version of the old DMA channel. Without UltraDMA your system cannot take advantage of the higher data transmission rates of the new UltraATA hard drives. Universal Serial Bus or USB, is a versatile port. This one port type can function as a serial, parallel, mouse, keyboard, or joystick port. [. . . ]