User manual TYAN THUNDER N3600T S2937

[. . . ] Thunder n3600T /// S2937 Revision 1. 00 Copyright© TYAN Computer Corporation, 2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, S2937 are trademarks of TYAN Computer Corporation. [. . . ] Options: 32 MB / 64 MB / 128 MB / 256 MB / 512 MB / 1 GB / 2 GB 49 http://www. tyan. com 3. 4. 1. 3 Memory Config Options Sub-Menu Mem Clock Mode Options: Auto / Limit Memory Clock Options: DDR2 400 / DDR2 500 / DDR2 667 / DDR2 800 50 http://www. tyan. com 3. 4. 2 Integrated Devices This section allows you to configure Integrated Devices. USB Control Enable/disable USB controllers. Options: Disabled / USB1. 1 + USB2 USB BIOS Legacy Support Enables or disables support for USB keyboards or mice. (Enable for use with a non-USB aware Operating System such as DOS or UNIX) Options: Disabled / Enabled SATA0 / SATA1 / SATA2 Controller Enable/disable First Serial ATA Device. NOTE: Mobile platform, enable SATA, SAVE and EXIT BIOS SETUP. Then must do a power cycle during next POST. Options: Enabled / Disabled SAS Controller Enable/disable integrated LSI1068E SAS controller. Options: Enabled / Disabled Interrupt Mode Select interrupt mode between 8259/PIC mode or APIC mode. Options: PIC / APIC 3. 4. 2. 1 NV RAID Configuration Sub-Menu NV RAID Configuration Enable/disable NVIDIA RAID control. SATA controller must be enabled for RAID feature to function. Enabling Master SATA0 Secondary requires enabling Secondary SATA Channel. Both options are listed in Integrated Devices. Options: Disabled / Enabled SATA port 0/1/2/3/4/5 Raid Enable this device as RAID. Options: Disabled / Enabled 3. 4. 3 IDE Configuration This section allows you to fine tune the IDE configuration. Large Disk Access Mode UNIX, Novell Netware or other operating systems, select [Other]. If you are installing new software and the drive fails, change this selection and try again. Different operating systems require different representations of drive geometries. Options: Other / DOS Local Bus IDE Adapter Enable the integrated local bus IDE adapter. Options: Disabled / Primary / Secondary / Both 3. 4. 3. 1 Primary Master / Slave Sub-Menu The system displays advanced details like the number of heads/cylinders/sectors on the detected disk and the maximum storage capacity of the disk. This option lets you set the following hard disk parameters: Type Selects the type of device connected to the system. Options: None / ATAPI Removable / CD-ROM / IDE Removable / Other ATAPI / User / Auto Multi-Sector Transfers This option allows you to specify the number of sectors per block for multiple sector transfers. Options: Disabled / 2 Sectors / 4 Sectors / 8 Sectors / 16 Sectors LBA Mode Control Enables or disables LBA Mode. In LBA Mode, instead of referring to a cylinder, head and sector number, each sector is instead assigned a unique "sector number". In essence, the sectors are numbered 0, 1, 2, etc. [. . . ] By offering plenty of options for users, Tyan serves multiple market segments with the industry's most competitive services to support them. "Tyan's tech support is some of the most impressive we've seen, with great response time and exceptional organization in general" Anandtech. com Please feel free to contact us directly for this service at techsupport@tyan. com Help Resources: 1. See the beep codes section of this manual. See the TYAN website for FAQ’s, bulletins, driver updates, and other information: http://www. tyan. com 3. [. . . ]