User manual TYAN TIGER 200T

[. . . ] TM Tiger 200T S2505T User's Manual Revision 1. 01 Copyright © Tyan Computer Corporation, 2001. No part of this manual may be reproduced or translated without prior written consent from Tyan Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. Tiger 200T S2505T is a trademark of Tyan Computer Corporation. Intel, Pentium III, Celeron are registered trademarks of Intel Corporation. [. . . ] [Default setting is Disabled] Sets whether or not your installed CPU has internal cache [Default setting is Enabled] Sets whether or not external cache is installed. [Default is Enabled] Sets whether the CPU's L2 (Level 2) cache has ECC checking. [Default is Enabled] Shows the ID number for the processor used. [Default is Enabled] Sets whether BIOS should perform the quick POST during bootup. [Default is Disabled] CPU Internal Cache External Cache CPU L2 Cache ECC Checking Processor Number Quick Power On Self Test First Boot Device Sets the first device that the BIOS should check in order to bootup. [Default is Floppy] Sets the second device that the BIOS should check in order to boot-up. [Default is CD-ROM] Sets the third device that the BIOS should check in order to boot-up. [Default is HDD-0] Sets whether still another boot device should be checked. [Default is Enabled] Second Boot Device Third Boot Device Boot Other Device (continued on next page) Tiger 200T S2505T 35 (continued from previous page) Swap Floppy Drive If you have two drives and need to swap them for some reason, use this option. [Default setting is Disabled] Sets whether the BIOS should check all floppy drives during boot-up. [Default setting is Enabled] Sets whether the Num Lock key should be enabled during bootup. [Default is Enabled] Refers to the method that the system addresses memory above 1MB. [Default is Normal] Sets whether the keyboard input speed should be altered. [Default is Disabled] If above setting is Enabled, this sets the characters per second of keyboard input. [Default is 6] If above setting is Enabled, this sets the delay on character input from keyboard. [Default is 250] Sets whether the password should be enabled. [Default is Setup] Reserved function related to multi-processing capability. [Default is 1. 1] If your OS requires this setting, it can be altered from here. [Default is Non-OS2] Allows the S. M. A. R. T. protocol to report server system information over a network. [Default is Auto] Allows the BIOS to report to Win95 that no FDD exists (if this is the case). [Default is Enabled] Boot Up Floppy Seek Boot Up Numlock Status Gate A20 Option Typematic Rate Setting Typematic Rate Typematic Delay Security Option MPS Version Control for OS OS Select for DRAM > 64MB HDD S. M. A. R. T. [. . . ] It is fast enough to support video transfer, and is capable of supporting up to 127 daisy-chained peripheral devices. VGA (Video Graphics Array): the PC video display standard. V-SYNC: controls the vertical properties of the monitor. ZIF socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and the metal level is pulled down. This shifts the processor over and down, guiding it into place on the board. Tiger 200T S2505T 55 Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]