User manual TYAN TIGER I7520SD

[. . . ] Tiger i7520SD /// Version 1. 2 S5365 Copyright Copyright © TYAN Computer Corporation, 2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tiger i7520SD are trademarks of TYAN Computer Corporation. Intel, Sossaman, and combinations thereof are trademarks of Intel Corporation. [. . . ] VT100 / VT100. 8bit / PC-ANSI, 7bit / PC ANSI / VT100+ / VT-UTF8 / ASCII Flow Control This feature is used to enable the flow control. None / XON/XOFF / CTS/RTS Console Connection This feature is used to indicate whether the console is connected directly to the system or a modem is used to connect. after POST This feature is used to enable console redirection after OS has loaded. Off / On 48 3. 3. 5 DMI Event Logging Event Logging Select Enabled to allow logging of DMI events Enabled/ Disabled ECC Event Logging Select Enabled to allow logging of ECC events Enabled/ Disabled Mark DMI events as read Press <Enter> to mark DMI events as read. Clear all DMI event logs Setting this to `Yes' will clear the DMI event log after rebooting. No / Yes 49 3. 3. 6 Hardware Monitor Chassis Detection This feature is used to enable/disable the function: when chassis open event is detected, BIOS will record the event. Disabled / Enabled 50 3. 3. 6. 1 Voltage Monitoring 51 3. 3. 6. 2 Fan Speed Monitoring 52 3. 3. 6. 3 Temperature Monitoring 53 3. 3. 6. 4 Smart Fan Control 54 3. 4 Security Menu These settings allow you to configure the security options for your system. The system displays the current supervisor and user passwords. Diskette access This option allows the user to control access to diskette drives. Supervisor / Disabled Fixed disk boot sector This option allows the user to write protect boot sector on hard disk to protect against viruses. Normal / Write Protect Virus check reminder This feature is used to display reminder message at the boot process. Disabled / Enabled System backup reminder This feature is used to display reminder message at the boot process. Disabled / Enabled 55 Password on boot When enabled, the system will ask for a password at every boot. The system will continue booting only if the correct password is entered. If the wrong password is entered three times, the system will automatically shut down. Disabled / Enabled 56 3. 5 Power Menu These settings allow you to configure the power options for your system. Resume on Modem Ring When enabled, the system will be waked up when an incoming call is detected on the system. Off / On Resume On Time When enabled, this allows the system to be worked up at a specified time. This time is specified by the Resume Time parameter. Off / On Resume Time This option allows the user to specify the time when the system is to wake up. Power Button Behavior This specifies the behavior of the system after the power button is pressed. On/Off - This powers on or off the system after the power button is pressed. Wake/Sleep - This wakes the system from sleep or puts the system to sleep. 57 3. 6 Boot Menu Use this screen to select options for the Boot Settings Configuration. The boot menu will list all bootable devices. [. . . ] PCI card that allows a RAID card to use the onboard SCSI chip, thus lowering cost of RAID solution ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shift the processor over and down, guiding into the board and locking it into place. 77 Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]