User manual TYAN TITAN TURBO ATX

[. . . ] Revision 1. 0 TYAN S1572 ATX Pentium Class 75 thru 200MHz 430TX PCI-ISA System Board User's Manual Notice for the USA Compliance Information Statement ( Declaration of Comformity Procedure) DoC FCC Part 15: This Device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one or more of the following measures: wReorient or relocate the receiving antenna. wIncrease the separation between the equipment and receiver. [. . . ] wBIOS features setup This setup page includes all of the enhanced features of Award's BIOS. wChipset features setup This setup page includes all the items of the 430TX chipset features. wPower Management setup Change, set, or disable system power management options. w PNP/PCI Configuration This setup page allows you to modify the configuration of PCI slot parameters. w Load setup defaults BIOS defaults indicate the most appropriate values of each system parameter for your system. wSupervisor/User Password Change, set, or disable password. It allows you to limit access to the system and Setup. wIntegrated Peripherals This option lets you enable or disable on board FDD, HDD, and I/O options. wIDE HDD auto detection Automatically configure hard disk parameters. wSave and exit setup Save changes to CMOS and exit setup. wExit without saving Abandon all CMOS changes and exit setup. S1572-001-01 http://www. tyan. com 21 4. 5. Standard CMOS Setup Menu The items in Standard CMOS Setup Menu (Figure 4. 2) are divided into 9 categories. Each category includes one or more setup items. Use the arrows to highlight the item and use the <PgUp> or <PgDn> keys to select the value you want for each item. Figure 4. 2: Standard CMOS Setup Menu ROM ISA BIOS (2A59CT51) STANDARD CMOS SETUP AWARD SOFTWARE, INC. Date (mm:dd:yy) : Tue, Dec 7 1995 Time (hh:mm:ss) : 18 : 01 : 38 Type Size CYLS. LANDZONE SECTORS Primary Master : none 0mb 0 0 0 0 0 Primary Slave: none 0mb 0 0 0 0 0 Secondary Master: none 0mb 0 0 0 0 0 Secondary Slave: none 0mb 0 0 0 0 0 Drive A : 1. 44 M, 3. 5 in. Base Memory: 640 K Drive B : 1. 2 M, 5. 25 in. Extended Memory: 7168 K Expanded Memory: 0 K Video : EGA/VGA Other Memory: 384 K Halt On : All errors ESC: F1: Quit Help Total Memory: : Select Item (Shift)F2: Change Color 8192 K PU/PD/+/-: Modify F3: Toggle Calendar w Date The date format is <month>, <day>, <year>. w Time The time format is <hours>, <minutes>, <seconds>. The time is calculated based on the 24-hour military-time clock. The day, from Sun to Sat, Determined by the BIOS date, month and year entries. Date The date, from 1 to 31 (or maximum allowed in a month) Month The month, Jan to Dec. [. . . ] This means that you can not run it with Windows running or with any memory manager software. You must disable any memory manager first. Boot your system from a bootable floppy disk with no CONFIG. SYS or AUTOEXEC. BAT files, and then run Flash Memory Writer from a backup copy of your support disk. You can make your back-up floppy bootable when you format it, and use one disk for both purposes. [. . . ]