User manual TYAN TITAN VX AT

[. . . ] Revision 1. 0 TYAN S1470 Pentium Class 75 thru 200MHz 430VX PCI-ISA System Board User's Manual Table Of Contents 1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2 Hardware Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 3 Software Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. 4 Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use the arrow keys to select among the items and press <Enter> to accept or enter each sub-menu. S1470-001-01 http://www. tyan. com 20 4. 2. Control Keys PgUp key Increases the numeric value or make changes PgDn key Decreases the numeric value or make changes F1 key General help, only for Status Page Setup menu and Option Page Setup Menu F2 key Change color from a total of 16 colors F3 key Calendar, only for Status Page Setup Menu F4 key Reserved F5 key Restore the previous CMOS value, only for Option Page Setup Menu F6 key Load defaults F8 key Reserved F9 key Reserved F10 key Save all CMOS changes, only for Main Menu S1470-001-01 http://www. tyan. com 21 4. 3. Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. 4. 3. 2. Setup Page menu/Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted items. To exit the Help Window, press <Esc>. 4. 4. The Main Menu Once you enter the Award BIOS CMOS Setup Utility, the Main Menu (Figure 4. 1) will appear on the screen. The Main Menu allows you to select from the eight setup functions and 2 exit choices. Use the arrow keys to select among the items and press <Enter> to accept or enter the sub-menu. Figure 4. 1: Main Menu ROM ISA BIOS (2A59CT51) CMOS SETUP UTILITY AWARD SOFTWARE, INC. STANDARD CMOS SETUP BIOS FEATURED SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT PNP/PCI CONFIGURATION LOAD BIOS DEFAULTS INTEGRATED PERIPHERAL SUPERVISOR PASSWORD USER PASSWORD IDE HDD AUTO DETECT SAVE AND EXIT EXIT WITHOUT SAVING ESC : Save & Exit Setup F10 : Quit (Shift)F2 :Select Item :Change Color Time, Date, Hard Disk Type, . . . . . S1470-001-01 http://www. tyan. com 22 w Standard CMOS setup This setup page includes all the items in a standard compatible BIOS. w BIOS features setup This setup page includes all of the enhanced features of Award's BIOS. w Chipset features setup This setup page includes all the items of the 430HX chipset features. w Power Management setup Change, set, or disable system power management options w PNP/PCI Configuration This setup page allows you to modify the configuration of PCI slot parameters. w Load setup defaults BIOS defaults indicate the most appropriate values of each system parameter for your system. w Supervisor/User Password Change, set, or disable password. It allows you to limit access to the system and Setup. w Integrated Peripherals This option lets you enable or disable on board FDD, HDD, and I/O options. w IDE HDD auto detection Automatically configure hard disk parameters. w Save and exit setup Save changes to CMOS and exit setup w Exit without saving Abandon all CMOS changes and exit setup. S1470-001-01 http://www. tyan. com 23 4. 5. Standard CMOS Setup Menu The items in Standard CMOS Setup Menu (Figure 4. 2) are divided into 9 categories. Each category includes one or more setup items. Use the arrows to highlight the item and use the <PgUp> or <PgDn> keys to select the value you want for each item. Figure 4. 2: Standard CMOS Setup Menu ROM ISA BIOS (2A59CT51) STANDARD CMOS SETUP AWARD SOFTWARE, INC. Date (mm:dd:yy) : Tue, Dec 7 1995 Time (hh:mm:ss) : 18 : 01 : 38 Type Si CYLS. [. . . ] This means that you can not run it with Windows running or with any memory manager software. You must disable any memory manager first. Boot your system from a bootable floppy disk with no CONFIG. SYS or AUTOEXEC. BAT files, and then run Flash Memory Writer from a backup copy of your support disk. You can make your back-up floppy bootable when you format it, and use one disk for both purposes. [. . . ]