User manual TYAN TOLEDO I3210W S5211

[. . . ] Phoenix, Phoenix-AwardBIOS are trademarks of Phoenix Technologies. Microsoft, Windows are trademarks of Microsoft Corporation. IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. Notice Information contained in this document is furnished by TYAN Computer Corporation and has been reviewed for accuracy and reliability prior to printing. TYAN assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TYAN products including liability or warranties relating to fitness for a particular purpose or merchantability. [. . . ] Don’t force link width. PCI Express Graphics Port [Auto] ------------------------------------------------------------------------PEG Enabled PEG Number PEG Width -------------------------------------------------------------------------PEG Slot Number PEG Power Limit PEG Slot Card Detect F1 Help Esc Exit ↑↓ Select Item ← → Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit PCI Express Graphics Port This feature is used to control the PCI Express Graphics port. Options: Auto / Enabled / Disabled / Debug PEG Enabled / PEG Number / PEG Width / PEG Slot Number / PEG Power Limit / PEG Slot Card Detect Read only. 48 3. 4. 1. 2. 2 PCI-E2 Sub-Menu Main PhoenixBIOS Setup Utility Advanced Security Power PCI-E2 Sub-Menu Boot Exit Item Specific Help Disabled --- Port always disabled. (If Port #1 is disabled, then the rest of the Ports will also be disabled. ) Enabled --- Port always enabled. Auto --- Only enable if card found. PCI-E Port 1 [Auto] ------------------------------------------------------------------------Port #1 Enabled Port #1 Number Port #1 Width -------------------------------------------------------------------------Port #1 Slot Number Port #1 Power Limit Port #1 Slot Card Detect F1 Help Esc Exit ↑↓ Select Item ← → Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit PCI Express Port #1 This feature is used to control the PCI Express Port #1. Options: Auto / Enabled / Disabled Port #1 Enabled / Port #1 Number / Port #1 Width / Port #1 Slot Number / Port #1 Power Limit / Port #1 Slot Card Detect Read only. 49 3. 4. 2 Advanced Processor Options This section allows you to fine-tune the processor options. Main PhoenixBIOS Setup Utility Advanced Security Power Advanced Processor Options [Enabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Enabled] [Disabled] [Enabled] [Default] [X 12] [GV1/GV3 Only] Boot Exit Item Specific Help Enabling Hyperthreading activates additional CPU threads. These threads may appear as additional processors but will share some resources with the other threads within the physical package. Hyperthreading: Core Multi-Processing Single Logical Proc. Mode Thermal Management 2 Set Max Ext CPUID = 3 C1 Enhanced Mode PECI Interface Intel® Virtualization Technology No Execute Mode Mem Protection Frequency Ratio Frequency Hi Ratio Processor Power Management F1 Help Esc Exit ↑↓ Select Item ← → Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values Hyperthreading Enable this only if you have an Intel Hyper Threading processor. Enabling Hyperthreading activates additional CPU threads. These threads may appear as additional processors but will share some resources with the other threads within the physical package. Options: Enabled / Disabled Core Multi-processing Determines whether the second core is enabled. [Disabled]: the second core is disabled [Enabled]: the second core is enabled Options: Disabled / Enabled Single Logical Proc. (read only) View DMI Event Log It allows you to view the contents of the DMI event log. (read only) Event Logging Select [Enabled] to allow logging of DMI events. Options: Enabled / Disabled Mark DMI Events as Read Press [Enter] to mark DMI events as read. Clear all DMI Event logs When set to [Enabled], BIOS event log will be cleared. Options: Disabled / Enabled 53 3. 4. 5 Hardware Monitor This section allows you to fine tune the Hardware Monitor configuration. Main PhoenixBIOS Setup Utility Advanced Security Power Hardware Monitor Boot Exit Item Specific Help Voltage Monitoring CPU FAN1 FAN2 FAN3 FAN4 FAN5 FAN6 CPU Temp. FAN Fail LED Indicator Auto FAN Control F1 Help Esc Exit ↑↓ Select Item ← → Select Menu [Disabled] [Disabled] -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values CPU FAN1/FAN2/FAN3/FAN4/FAN5/FAN6/CPU Temp. /Ambient1 Temp. / Ambient2 Temp. FAN Fail LED Indicator When it is set to [Enabled], the LED will be on when the FAN failed. Options: Disabled / Enabled Auto Fan Control: This feature is used to set function of Auto Mode Fan Control. Options: Enabled / Disabled 54 3. 4. 5. 1 Voltage Monitoring Sub-Menu Main PhoenixBIOS Setup Utility Advanced Security Power Voltage Monitoring Boot Exit Item Specific Help CPU Vcore Vddr2 5V 12V 3. 3V F1 Help Esc Exit ↑↓ Select Item ← → Select Menu -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Previous Values All items on this submenu can not be modified in user mode. Read only. 55 3. 4. 6 IPMI This section allows you to configure the IPMI settings. (This submenu will appear when an IPMI card is installed. ) Main PhoenixBIOS Setup Utility Advanced Security Power IPMI Boot Exit Item Specific Help Display the System Event Log System Event Log System Event Log (list mode) Realtime Sensor Data IPMI Specification Version BMC Firmware Version System Event Logging Clear System Event Log Existing Event Log number Remaining Event Log number Event Log Control SYS Firmware Progress BIOS POST Errors BIOS POST Watchdog OS boot Watchdog Timer for loading OS (SEC) Time out action F1 Help Esc Exit ↑↓ Select Item ← → Select Menu 2. 0 0. 00. 00000000 [Enabled] [Disabled] 7 (unknown) [Disabled] [Enabled] [Disabled] [Disabled] [10] [No action] -/+ Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit IPMI Specification Version / BMC Firmware Version It displays the version of the IPMI Specification and BMC Firmware. [. . . ] Your system has most likely been configured or designed by them and they should have the best idea of what hardware and software your system contains. Hence, they should be of the most assistance for you. Furthermore, if you purchased your system from a dealer near you, take the system to them directly to have it serviced instead of attempting to do so yourself (which can have expensive consequences). If these options are not available for you then Tyan Computer Corporation can help. [. . . ]