User manual TYAN TOMCAT I7230B
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TYAN TOMCAT I7230B. We hope that this TYAN TOMCAT I7230B user guide will be useful to you.
Lastmanuals help download the user guide TYAN TOMCAT I7230B.
Manual abstract: user guide TYAN TOMCAT I7230B
Detailed instructions for use are in the User's Guide.
[. . . ] Tomcat i7230B
///
Version 1. 0
S5161
Copyright
Copyright © TYAN Computer Corporation, 2005. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp.
Trademark
All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tomcat i7230B are trademarks of TYAN Computer Corporation. Intel, Prescott, and combinations thereof are trademarks of Intel Corporation. [. . . ] SPP / EPP / ECP Base I/O Address / Interrupt This determines the base address and interrupt of the parallel port. 378 / IRQ7 / Disabled / 278 / IRQ5 / 3BC / IRQ7 DMA Channel This BIOS feature determines which DMA channel the parallel port should use when it is in ECP mode. The ECP mode uses the DMA protocol to achieve data transfer rates of up to 2. 5 Mbits/s and provides symmetric bidirectional communications. For all this, it requires the use of a DMA channel. By default, the parallel port uses DMA Channel 3 when it is in ECP mode. This feature is provided just in case one of your add-on cards requires the use of DMA Channel 3. In such a case, you can use this BIOS feature to force the parallel port to use the alternate DMA Channel 1. Please note that there is no performance advantage in choosing DMA Channel 3 over DMA Channel 1 or vice versa. As long as either Channel 3 or Channel 1 is available for your parallel port to use, the parallel port will be able to function properly in ECP mode. DMA 1 / DMA 3 Floppy Disk Controller This defines how the floppy disk controller is detected and configured. Enabled / Disabled
56 http://www. tyan. com
3. 3. 4 Hardware Monitor
57 http://www. tyan. com
3. 3. 4. 1 Voltage Monitoring
58 http://www. tyan. com
3. 3. 4. 2 Fan Control Selections
Auto Fan Control This feature is used to set function of Auto Mode Fan Control. Disabled / Enabled J15/J14/J18/J13 Number of Pins Select
These features are used to select 3 or 4 pin fan connector. After the setting, then you can use the function of "Auto Fan Control".
4 Pin / 3 Pin
59 http://www. tyan. com
3. 3. 5 DMI Event Logging
These items are used to view and modify DMI event logs.
Event Logging Select Enabled to allow logging of DMI events Disabled / Enabled ECC Event Logging Select Enabled to allow logging of ECC events Disabled / Enabled Clear all DMI event logs Setting this to `Yes' will clear the DMI event log after rebooting. No / Yes
60 http://www. tyan. com
3. 3. 6 Console Redirection
Com Port Address If enabled it will use a port on the motherboard. Disabled / On-board COM A / On-board COM B / NULL Baud Rate This feature is used to enable the specified baud rate. 300 / 19. 2K / 1200 / 2400 / 9600 / 38. 4K / 57. 6K / 115. 2K Console Type This feature is used to enable the specified console type. VT100 / VT100. 8bit / PC-ANSI, 7bit / PC ANSI / VT100+ / VT-UTF8 / NULL Flow Control This feature is used to enable the flow control. None / XON/XOFF / CTS/RTS Console Connection This feature is used to indicate whether the console is connected directly to the system or a modem is used to connect. Direct / Via modem 61 http://www. tyan. com
Continue C. R. after POST This feature is used to enable console redirection after OS has loaded. Off / On
3. 4 Security Menu
These settings allow you to configure the security options for your system.
The system displays the current supervisor and user passwords. Set Supervisor Password This option allows the supervisor to set the supervisor password to restrict access to the BIOS settings. [. . . ] Tyan's website (www. tyan. com) provides easy-to-access resources such as indepth Linux Online Support sections with downloadable Linux drivers and comprehensive compatibility reports for chassis, memory and much more. With all these convenient resources just a few keystrokes away, users can easily find the latest softare and operating system components to keep their systems running as powerful and productive as possible. Tyan also ranks high for its commitment to fast and friendly customer support through email. By offering plenty of options for users, Tyan serves multiple market segments with the industry's most competitive services to support them. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TYAN TOMCAT I7230B Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service. Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TYAN TOMCAT I7230B will begin.