User manual TYAN TOMCAT K8E

[. . . ] Tomcat K8E /// Version 1. 1 S2865 Copyright Copyright © TYAN Computer Corporation, 2004-2005. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tomcat K8E are trademarks of TYAN Computer Corporation. AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. [. . . ] If On is selected, the system automatically switches on when power is resumed. 56 http://www. tyan. com If Former-Sts is selected, the system automatically switches on and restores itself to the state it was last in when power failed. Former-Sts / On / Off WOL(PME#) From Soft-Off This feature is used to enable the function of wake on LAN from soft-off status. Disabled / Enabled WOR (RI#) From Soft-Off This feature is used to enable the function of wake on Ring from soft-off status. Disabled / Enabled Power-On by Alarm This option allows your system to turn on at a pre-selected time. Enabled / Disabled Day of Month Alarm This option allows you to set the date on which the system will turn on every month. Time (hh:mm:ss) Alarm This option allows you to set the time on which the system will turn on. AMD Cool `n' Quiet/Power Now This option allows you to set the function of AMD Cool'n Quiet or Power Now technology which controls your system's level of processor performance, dynamically adjusting the operating frequency and voltage. Auto / Disabled Power on Function This option defines how the system can be waked up from the sleep mode. Button only / keyboard+BTN / KB+Mouse+BTN / Mouse+BTN 57 http://www. tyan. com 3. 11 PnP/PCI Configuration Phoenix-AwardBIOS CMOS Setup Utility PnP/PCI Configuration Init Display First Reset Configuration Data Resource Controlled By x IRQ Resources PCI/VGA Palette Snoop xx PCI Express relatives items xx Maximum Payload Size [PCI-Ex] [Disabled] [Auto(ESCD)] Press Enter [Disabled] [4096] Item Specific Help ¡ô õ ö ¡÷ : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized defaults Init Display First This BIOS feature allows you to select whether to boot the system using the PCI Express graphics card or the PCI graphics card. This is particularly important if you have PCI Express and PCI graphics cards but only one monitor. PCI Slot / PCI Ex Reset Configuration Data This feature allows you to manually force the BIOS to clear the previously saved ESCD (Extended System Configuration Data) data and reconfigure the settings. Use this feature when the BIOS can not automtically detect the hardware change and reconfigure the ESCD. Enabled/Disabled Resources Controlled By When this option is set to AUTO, the BIOS by using ESCD, controls the IRQ and DMA assignments of all of the boot and PNP devices in the system. If you set this option to Manual, you will be able to manually assign all IRQ and DMA information. Auto (ESCD) / Manual IRQ Resources This option is used to manually assign IRQ resources. 58 http://www. tyan. com PCI/VGA Palette Snoop This option is only useful if you use an MPEG card or an add-on card that makes use of the graphics card's Feature Connector. Disabled / Enabled Maximum Payload Size This setting defines the maximum payload size. This controls the maximum amount of data that can be transferred in a packet. Larger payload sizes increase data throughput, but increase the time that an application must wait for data to begin being transferred. 128 / 256 / 512 / 1024 / 2048 / 4096 3. 12 PC Health Status This section monitors critical parameters of your PC and can automatically shutdown the PC if the temperature of the processor exceeds the specified threshold value. This is only available if there is a Hardware Monitor onboard. Phoenix-AwardBIOS CMOS Setup Utility PC Health Status Shutdown Temperature Auto Fan Power Control Min PWM Temperature Min PWM Duty Cycle Set CPU Temperature Current System Temp VDIMM VCCP 5V 12V 3. 3VSB VBat Vcc33 CPU Fan Speed Fan3 Speed Fan2 Speed Fan1 Speed [Disabled] [Disabled] [55¢J ] [50%] Item Specific Help ¡ô õ ö ¡÷ : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized defaults 59 http://www. tyan. com Shutdown Temperature This option allows a user to define the system shutdown temperature. [. . . ] With all these convenient resources just a few keystrokes away, users can easily find the latest software and operating system components to keep their systems running as powerful and productive as possible. Tyan also ranks high for its commitment to fast and friendly customer support through email. By offering plenty of options for users, Tyan serves multiple market segments with the industry's most competitive services to support them. "Tyan's tech support is some of the most impressive we've seen, with great response time and exceptional organization in general" Anandtech. com Please feel free to contact us directly for this service at techsupport@tyan. com Help Resources: 1. [. . . ]