User manual TYAN TOMCAT K8SH

[. . . ] Tomcat K8SH /// Revision 1. 10 S3850 Copyright © TYAN Computer Corporation, 2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tomcat K8SH S3850 are trademarks of TYAN Computer Corporation. AMD, AMD Opteron, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. [. . . ] Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. The settings are described on the following pages. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Select remote access type. Select Screen Select Item +/- Change Field F1 General Help F10 Save and Exit ESC Exit Configure Remote Access type and parameters Remote Access Serial port number Base Address, IRQ Serial port Mode Flow Control Redirection After BIOS POST Terminal Type VT-UTF8 Combo Key Support Sredir Memory Display Delay [Disabled] [COM1] [3F8h, 4] [115200 8, n, 1] [None] [Always] [ANSI] [Disabled] [No Delay] Feature Option Description Configure Remote Access type and parameters Enables remote access to system Enabled Remote Access through serial port. Disabled Serial port number Base Address, IRQ COM1 COM2 Read only 115200 8, n, 1 57600 8, n, 1 38400, 8, n, 1 19200 8, n, 1 09600 8, n, 1 47 Selects Serial Port for console redirection. Shows the IRQ of the selected Serial Port. Selects Serial Port settings. Serial port Mode http://www. tyan. com Feature Option Description Configure Remote Access type and parameters None Selects Flow Control for console redirection. Flow Control Hardware Software Disabled Redirection After BIOS POST Disable: Turns off the redirection after POST Boot Loader: Redirection is active during POST and during Boot Loader. <Some OSs may not work if set to Always> Selects the target terminal type. Boot Loader Always ANSI VT100 VT-UTF8 Disabled Enabled No Delay Delay 1 sec Delay 2 sec Delay 4 sec Terminal Type VT-UTF8 Combo Key Support Sredir Memory Display Delay Enables VT-UTF8 Combination key Support for ANSI/VT100 terminals. This file allows user to select the delay in seconds to display memory information. 3. 5. 13 ­ USB Configuration Sub-Menu You can use this screen to view the USB Configuration Menu. Use the up and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to change the value of the selected option. The settings are described on the following pages. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit USB Configuration Module Version ­ X. XX. X-XX. X USB Devices Enabled: None Legacy USB Support BIOS EHCI Hand-Off [Enabled] [Enabled] Enables USB host controllers. Select Screen Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit 48 http://www. tyan. com Feature USB Configuration Option Description Enables support for legacy USB. Disabled Legacy USB Support Enabled Enabled BIOS EHCI Hand-Off Disabled This is a work around for OSes without EHCI hand-off support. The EHCI ownership change should claim by EHCI driver. 3. 5. 14 Device & PCI Slots Configuration Sub-Menu You can use this screen to enable the onboard devices and PCI slots. Use the up and down arrow ( / ) keys to select an item. The settings are described on the following pages. Main Advanced BIOS Setup Utility PCI/PnP Boot Security Chipset Exit Onboard Device and PCI Slots Configuration Onboard LAN1 Device Onboard LAN1 OP-ROM Onboard LAN2 Device Onboard LAN2 OP-ROM [Enabled] [Disabled] [Enabled] [Disabled] Enabled Disabled Select Screen Select Item +/- Change Option F1 General Help F10 Save and Exit ESC Exit Description Feature MPS Configuration Onboard LAN1 Device Onboard LAN2 Device Option Disabled Enabled/Disabled LAN controller Enabled Disabled Executed LAN OPROM or not Enabled Onboard LAN1 OP-ROM Onboard LAN2 OP-ROM 49 http://www. tyan. com 3. 6 ­BIOS PCI/PnP Menu You can use this screen to view PnP (Plug & Play) BIOS Configuration Menu. This menu allows the user to configure how the BIOS assigns resources & resolves conflicts. Use the up and down arrow ( / ) keys to select an item. [. . . ] Besides designing innovative and quality products for over a decade, Tyan has continuously offered customers service beyond their expectations. Tyan's website (www. tyan. com) provides easyto-access resources such as in-depth Linux Online Support sections with downloadable Linux drivers and comprehensive compatibility reports for chassis, memory and much more. With all these convenient resources just a few keystrokes away, users can easily find the latest software and operating system components to keep their systems running as powerful and productive as possible. Tyan also ranks high for its commitment to fast and friendly customer support through email. [. . . ]