User manual TYAN TRINITY 510

[. . . ] Trinity 510 Manual Revision 2. 01 S2266 Copyright © TYAN Computer Corporation, 2001. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Trinity 510 S2266 are trademarks of TYAN Computer Corporation. Intel, Intel Pentium, combinations thereof are trademarks of Intel Corporation. [. . . ] Enabled Disabled Auto Toggles use of serial ports A and or B. Enabling ports also requires you to enter the I/O address for that port unless you select Auto. These options are dependent on the IRQ and vice versa. These IRQs are paired with the Base I/O option. Recommended config: 2F8 & IRQ3 3F8 & IRQ4 Enabled requires manual input of port parameters. We recommend you leave this option on Auto. Standard one-way protocol for parallel devices. Two-way protocol Enhanced Parallel Port may provide higher bandwidth if an EPP compliant device is used (e. g. Enhanced Compatibility Port may provide higher bandwidth if an ECP compliant device is used (e. g. These options appear when the parallel port is set to Enabled. These options appear when the parallel port is set to Enabled. These options appear when parallel port is set to Enabled. (optional feature) Leave this setting as is. (optional feature) Leave this setting as is. (optional feature) Serial Port 1, 2 Serial 2 Mode Serial Base I/O Enabled Disabled 3F8, 2F8 3E8, 2E8 IRQ3 IRQ4 Serial Interrupt Parallel Port Enabled Disabled Auto Output Only Bi-directional EPP Parallel Port Mode ECP Parallel Address Parallel IRQ 378 278 3BC IRQ5 IRQ7 DMA1 DMA2 201 330 10 ECP DMA Channel Game Port Address MIDI Port Address MIDI Port IRQ 24 http://www. TYAN. com 3. 9 Power Management Setup Options related to power management can be altered through the following. Enabled Disabled S1 (POS) User Define Maximum Saving Minimum Saving Disabled 1, 5, 10, 20, 30, 45, 60 minutes Disabled Standby Sleep Suspend -> Off Standby V/H SYNC+Blank Blank Off Instant-Off 4-seconds Off On Toggles advanced power and configuration done by OS. Defines the type of power saving features the system should follow. Defines the method used to power off the system. Defines the method used to power off video. Defines the method used to power off graphics. Defines the action of the power button when pressed. Defines whether the system will remain off if power fails or turn on when power is restored. ACPI function ACPI Suspend Type Power Management Option HDD Power Down Suspend Mode Video Off Option Video Off Method Soft-Off by PWRBTN PWRON After PWR-Fail IEQ/Event Activity Detect Press Enter 3. 10 IRQ/Event Activity Detect Options related to IRQ events can be altered through the following. [. . . ] ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shift the processor over and down, guiding into the board and locking it into place. 35 http://www. TYAN. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]