User manual TYAN TRINITY I845

[. . . ] Trinity i845 S2090 User's Manual Revision 1. 00 Copyright © Tyan Computer Corporation, 2001. No part of this manual may be reproduced or translated without prior written consent from Tyan Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. Tyan, Trinity S2090 are trademarks of Tyan Computer Corporation. Intel, Intel Pentium, i845, combinations thereof are trademarks of Intel Corporation. [. . . ] Even a seemingly small change to anyone of the Chipset options without consideration, can cause your system to become unstable immediately or progressively. Setup Variations Not all systems have the same setup program. While the basic look and function of the setup program remains more or less the same for all systems, the appearance of your Setup options may or may not follow the same order listed in this manual. In addition, the final layout of all Setup options depends on your system designer. They can decide that certain items that are listed in the following pages remain hidden from user alteration. 3. 1 Standard CMOS Features In this section, you can alter general features such as the data and time, as well as access to the IDE configuration options. Note that the options listed below are for options that can directly be changed within the Main Setup screen. HH: Hours (24 hour format) MM: Minutes SS: Seconds None Auto Manual None Auto Manual None 360K, 5. 25 in. Same options as Drive A Adjusts the system clock. System Time IDE Primary Master/Slave Default: Auto Detects IDE drives. IDE Primary Master/Slave Default: Auto Detects IDE drives. Defines floppy drive type. Drive A Default: 1. 44M, 3. 5 in. Drive B Default: None Video Default: EGA/VGA Defines floppy drive type. EGA/VGA CGA 40 CGA80 Defines video display mode. 29 http://www. tyan. com MONO 3. 2 Advanced BIOS Features In Advanced BIOS Features, you will be able to adjust many of the feature that effect system speed and bootup options. Virus Warning Default: Disabled Enabled Disabled Toggles protection of the boot sector on the hard drive from being corrupted by a virus. Changes the system book sequence and defines which device will boot first. CPU L1 & L2 Cache Default: Auto Enabled Disabled First to Other Boot Device Swap Floppy Drive Default: Disabled Boot Up Floppy Seek Default: Enabled Boot Up NumLock Status Default: On Gate A20 Option Default" Fast Typematic Rate Setting Default: Disabled Typematic Rate (chars/Sec) Default: 6 Typematic Delay (MSec) Default: 250 Floppy LS-120 HDD-0 SCSI CDROM HDD-1 HDD-2 HDD-3 ZIP100 LAN Disabled Enabled Disabled Enabled Disabled On Off Fast Normal Enabled Disabled 6, 8, 10, 12, 15, 20, 24, 30 Enables turns A: drive into B: drive and vice versa. Toggles seeking of floppy drive during POST. Toggles control of keyboard key repeat rate. Defines how many characters are repeated per second. Defines the delay that occurs at key stroke before that key will start to repeat. Sets the password on either just the BIOS setup or the entire system (BIOS setup included). Select OS2 only if you are running OS/2 operating system with more than 64MB of RAM. Tells Win9x not to display the floppy drive if there are 250, 500, 750, 1000 Security Option Default: Setup OS Select for DRAM > 64MB Default: Non-OS2 Report No FDD for WIN95 Default: No Setup System Non-OS2 OS2 No Yes 30 http://www. tyan. com Small Logo(EPA) Show Default: Disabled Enabled Disabled none installed. Toggles the display of the EPA Energy Star logo at POST. 3. 3 Advanced Chipset Features In Advanced BIOS Features, you will be able to adjust many of the feature that effect system speed and bootup options. DRAM Timing Selectable Default: By SPD Memory Frequency For Default: Auto DRAM Read Thermal Mgmt Default: Disabled System BIOS Cacheable Default: Enabled Video BIOS Cacheable Default: Disabled Video RAM Cacheable Default: Disabled Manual SPD PC100 PC133 Auto Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Leave as Default. Leave as Default. Leave as Default. Memory Hole At 15M-16M Default: Disabled Delayed Transaction Default: Enabled AGP Aperture Size (MB) Default: Disabled Delay Prior to Thermal Default: Enabled 3. 4 Integrated Peripherals Enabled Disabled 4, 8, 16, 32, 64, 128, 256 4, 8, 16, 32 Toggles BIOS caching on and off. Creates a memory reserve at 15 to 16MB address in RAM for ISA devices that require it. [. . . ] ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shift the processor over and down, guiding into the board and locking it into place. 39 http://www. tyan. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]