User manual TYAN TRINITY I845DDR

[. . . ] Trinity i845DDR S2095 Revision 1. 00 Copyright © TYAN Computer Corporation, 2001-2002. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Trinity i845DDR S2095 are trademarks of TYAN Computer Corporation. [. . . ] Changes PIO (Programmed I/O) interface mode for HDD. Changes UDMA (Ultra Direct Memory Access) interface mode for HDD. Defines which graphics device to start first. Toggles the use of a USB keyboard under DOS. Leave this setting as is. 23 http://www. tyan. com Serial Port 1, 2 Serial 2 Mode Serial Base I/O Enabled Disabled Auto Enabled Disabled 3F8, 2F8 3E8, 2E8 IRQ3 IRQ4 Toggles use of serial ports A and or B. Enabling ports also requires you to enter the I/O address for that port unless you select Auto. These options are dependent on the IRQ and vice versa. These IRQs are paired with the Base I/O option. Recommended config: 2F8 & IRQ3 3F8 & IRQ4 Enabled requires manual input of port parameters. We recommend you leave this option on Auto. Standard one-way protocol for parallel devices. Two-way protocol Enhanced Parallel Port may provide higher bandwidth if an EPP compliant device is used (e. g. Enhanced Compatibility Port may provide higher bandwidth if an ECP compliant device is used (e. g. These options appear when the parallel port is set to Enabled. These options appear when the parallel port is set to Enabled. These options appear when parallel port is set to Enabled. (optional feature) Leave this setting as is. (optional feature) Leave this setting as is. (optional feature) Serial Interrupt Parallel Port Enabled Disabled Auto Output Only Bi-directional EPP Parallel Port Mode ECP Parallel Address Parallel IRQ ECP DMA Channel Game Port Address MIDI Port Address MIDI Port IRQ 378 278 3BC IRQ5 IRQ7 DMA1 DMA2 201 330 10 24 http://www. tyan. com 3. 5 Power Management Setup Options related to power management can be altered through the following. ACPI function ACPI Suspend Type Power Management Option HDD Power Down Suspend Mode Video Off Option Video Off Method Soft-Off by PWRBTN PWRON After PWR-Fail IEQ/Event Activity Detect VGA LPT & COM HDD & FDD PCI Master Power On by PCI Card Modem Ring Resume RTC Alarm Resume IRQs Activity Monitoring 3. 6 PCI Configuration Rest Configuration data Default: Disabled Resources Controller by Default: Auto(ESCD) PCI/VGA Palette Snoop Default: Enabled Enabled Disabled Auto(ESCD) Manual Enabled Disabled Leave as Default. Defines whether system resources are controller by BIOS or by user. Enabled Disabled S1 (POS) User Define Maximum Saving Minimum Saving Disabled 1, 5, 10, 20, 30, 45, 60 minutes Disabled Standby Sleep Suspend -> Off Standby V/H SYNC+Blank Blank Off Instant-Off 4-seconds Off On Press Enter Off On LPT/COM LPT COM On Off On Off Disabled Enabled Disabled Enabled Disabled Enabled Press Enter Toggles advanced power and configuration done by OS. [. . . ] ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shift the processor over and down, guiding into the board and locking it into place. 32 http://www. tyan. com Technical Support If a problem arises with your system, you should turn to your dealer for help first. Your system has most likely been configured by them, and they should have the best idea of what hardware and software your system contains. [. . . ]