User manual ULTIMATE SPEED KH 4106 MINI COMPRESSOR

[. . . ] Take note that the Mini Compressor is not suitable for constant operation. Thus do permit the Mini Compressor to be switched on without a break for periods in excess of 10 minutes. Allow it to cool down for at least 30 minutes before switching it back on. The Mini Compressor should not be used or stored in dusty environments. [. . . ] Unwind the power cable t to its full length. With tobacco shreds or ash): Clean it with a non-con-ducting object before inserting the cigar lighter plug u. Otherwise it could cause a malfunction in the operation of the Mini Compressor. Ideal would be a small brush, cotton buds or something similar. Also, do not insert your fingers into the cigar lighter holder!Should you do so, you may receive an electrical shock!Screw the required adaptor into the opening of the connection valve r. Press the opened connection valve r onto the valve of the object to be inflated. press it down so that it is firmly seated. Should you be using one of the adaptors i: Press the connection valve with the adaptor into the valve of the object to be inflated. Ensure that the connection valve cannot disconnect itself from the valve of the object being inflated. Switch on the vehicle ignition should this be necessary for the cigar lighter to function. If necessary, obtain assistance from a second person. Twist the turn switch y in a clockwise direction until it audibly engages. As soon as the desired air pressure is displayed on the mamometer w : Switch the Mini Compressor off. Twist the turn switch y this time in an anti-clockwise direction until it audibly engages. If necessary, switch off the vehicle ignition. Pull the connection valve (complete with the adaptor, if one has been used) from the valve of the inflated object. Turn the connection valve back and forth to make it easier to remove. When removing the connection valve air can escape from the valve of the object that has been inflated. Therefore ensure that the connection valve is removed as quickly as possible. For measuring the pressure of an inflated object the Mini Compressor does not require electricity. [. . . ] The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. [. . . ]