User manual ULTIMATE SPEED KH 3017

[. . . ] Never use it to lift a whole vehicle completely off the ground. Make sure that no-one ­ especially a child ­ is in the vehicle and that everyone is kept at an adequate distance away from the vehicle when the hydraulic vehicle jack is in use. Never change the setting of the safety valve 4 . [. . . ] Make sure that no petrol, battery acid or any other dangerous substance can flow out of the vehicle when the vehicle is being lifted. These operating instructions form a part of this product. Make yourself familiar with all the operating instructions and safety advice for the product before use. Use the product only as described and for the indicated purpose. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. Saddle Extension screw (for saddle) Lever socket Safety valve Release valve Tube section with locating slot Tube section with pin Pumping lever It is forbidden to lift people with this appliance. Restrictions on use: Other uses of or changes to the hydraulic car jack, as mentioned before, are not as intended and could lead to risks such as injuries and damage. The manufacturer does not assume any liability for damage arising from improper use. Now raise the car until the chassis stands can be placed beneath the car. J llow the vehicle to come down on to the axle stands by slowly A opening the release valve 5 by turning it in the direction. A) until the vehicle moves downwards but not enough that hydraulic oil escapes from the release valve 5 . Lower the vehicle slowly otherwise there is the danger of injury and damage to the product or to the vehicle. J lose the release valve by turning it in the C direction. J crew the extension screw 2 in the S direction downwards. The vehicle jack to pieces yourself may result in it not working properly. J lean the hydraulic vehicle lever when necessary with a cloth. [. . . ] J lean the hydraulic vehicle lever when necessary with a cloth. They can be disposed of at your local recycling facility. Follow these steps: j irst raise the vehicle slightly in order to be able to remove the F axle stands. [. . . ]