User manual UMAX ASTRA 4000U

[. . . ] Astra 4000U Owner's Manual Trademarks UMAX is a trademark of UMAX Technologies, Inc. Astra is a trademark of UMAX Technologies, Inc. IBM PC/AT is a trademark of International Business Machines Corporations. MS-Windows, Windows, and MS-DOS are trademarks of Microsoft Corporation. [. . . ] Rotate 90 CCW ­ rotates the image 90 degrees counter clockwise. Rotate 90 CW ­ rotates the image 90 degrees clockwise. Normal ­ does not rotate or flip the image. Flip Vertical ­ flips the image vertically. Rotate 180 ­ rotates the image 180 degrees clockwise. Inverts an image ­ changes all the dark tones in an image to light tones, and all of the light tones to dark tones. This option can NOT be reversed using the Edit menu Undo command. Clicking on the image that shows the desired orientation rotates or flips the image. Clicking the Reset button cancels the rotate or flip action and returns the image to the original orientation. Using VistaAccess ­ Direct Access VistaAccess is a utility that provides instant access to several VistaScan applications. VistaAccess loads at startup, and can be found in the system tray. When VistaAccess is open, it allows you to open any of the listed applications with a few clicks of your mouse. To use VistaAccess from the PC: a) Click on the Start bar. When the Programs pop0-up menu appears, click the VistaScan option. Click the VistaAccess option to display the scanner icon in the Windows Task bar (near the time display in the lower right corner of the window in the system tray). b) Click the scanner icon in the system tray using your right mouse button. A pop-up menu appears which contains: · · · · · · · · c) VistaScan VistaShuttle Copy Utility Scanner Test Push Button Configuration Power Saving On/Off Control Find/Refresh Scanner Exit Click on one of the listed applications or utilities to launch the software. d) Click the Find/Refresh Scanner option to re-initialize the scanner. Click the Help option to view VistaAccess online help. Click the Exit option to remove the scanner icon from the Windows Task bar and close VistaAccess. To use VistaAccess from the Macintosh: 1. Click on the control strip in the lower left corner of the Desktop. A drop down menu appears which contains: · · · VistaScan Power Saving On/Off Control Find/Refresh Scanner 27 2. 3. Click on one of the listed applications or utilities to launch the software. Click the Find/Refresh Scanner option to re-initialize the scanner. Click the Help option to view VistaAccess online help. [. . . ] Make sure the scanner extension is loaded and on. 44 Problem: The following error message appeared: "Scanner not found" or "Unable to control scanner" Solution: Follow this procedure: 1. Confirm the scanner is plugged into the computer's USB port. Go to the Apple System Profiler, listed under the Apple menu. Verify the scanner is listed under the USB tree as: Class: 0 Product ID: 16 Vendor ID: 5638 4. [. . . ]