User manual UMAX ASTRA MX3

[. . . ] UMAX Astra MX3 OWNER'S GUIDE TRADEMARKS UMAX is a trademark of UMAX Technologies, Inc. Astra is a trademark of UMAX Technologies, Inc. IBM PC/AT is a trademark of International Business Machines Corporation. Macintosh is a registered trademark of Apple Computer, Inc. [. . . ] You change the values by altering the shape of the curve that represents the brightness values of pixels. Click Reset to cancel the changes and return the value to the default setting. Adjusting the Color Balance The Color Adjustment feature controls the hue and saturation of a particular color. When you click on the Color Balance tab from the Color Adjustments panel, a continuous color spectrum wheel appears. 35 When you click in the wheel the image tones of the preview image are shifted to the particular hue that is represented in that area. Click on the Reset button to cancel the changes and return the value to default setting. Rotating/Inverting an Image You can rotate an image clockwise or counter clockwise, and you can flip images 180°vertically or horizontally. The following lists the possible rotate and flip selections: · · · · · · · · · Flip/Rotate Horizontally 90° clockwise Flip/Rotate Horizontally 90° counter clockwise Flip Horizontal Rotate 90° counter clockwise Rotate 90° Clockwise Normal - does not rotate or flip the image. Flip Vertical Rotate 180° clockwise Inverts an image - Changes all the dark tones in an image to light tones, and all of the light tones to dark tones. This option can NOT be reversed using the Edit menu Undo command. Clicking on the image that shows the desired orientation rotates or flips the image. Click on the Reset button to cancel changes and return the image to the original orientation. 36 UMAX Astra MX3 Owner's Guide Using VistaAccess - Direct Access VistaAccess is a utility that provides instant access to several MX3 Scanner settings. Note: You access VistaAccess from the Control Strip on your desktop. If you do not have the Control Strip feature installed on your Macintosh computer, you can install it from the Macintosh OS CD-ROM To use VistaAccess: Click on the VistaScan icon on the Control Strip. (It looks like a scanner. ) A pop-up menu will open with the following options: · · VistaScan - Loads the VistaScan D. A. Push Button Configuration - Use this to set your Astra MX3 buttons. Note See more about Push Button Configuration in the section Push Button Scanning in Chapter 4. · Lamp On/Off Control - Controls the scanner's lamp power saving utility. Refer to the section "Turning the Scanner Lamp On and OFF below. Note: The lamp remains on whenever the scanner has power, unless you turn it off. See more in the section titled turning the Scanner Lamp On and Off. · Find/Refresh Scanner - Re-initializes the scanner. If the VistaScan Icon has a red X over it, the scanner may be disconnected from a power source. Turning the Scanner Lamp On and Off You can turn the scanner lamp on and off using the Astra MX3's built-in Power Saving utility. The lamp remains on whenever the scanner has power, unless you turn it off using the UMAX Power Saving utility. To turn the lamp on or off on your Mac: 1. Click on the VistaAccess Scanner icon in the control strip and select Lamp On/Off Control from the pop-up menu. Click on the On or Off button. To turn the lamp on or off on your PC: 37 The Power Saving window appears at the bottom-right corner of your desktop by default when you close VistaScan. To turn the scanner lamp off: Click on the image of the scanner in the Power Saving utility window. After a second or two, the light in the scanner image goes out, and your scanner lamp is turned off. [. . . ] 3) Include a copy of the bill of sale with the returned product. 4) Unless otherwise instructed, do not return any manuals or software when returning items for repair. 5) All scanners and transparency adapters need to be locked or restrained prior to transport. Failure to lock or restrain these items could cause serious damage to the product and void the warranty. [. . . ]