Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual UMAX E3000. We hope that this UMAX E3000 user guide will be useful to you.
Lastmanuals help download the user guide UMAX E3000.
Manual abstract: user guide UMAX E3000QUICK INSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] E3000 Quick Installation Guide
STEP 1 Connect the e3000
e3000 Quick In
Before you install the Bullet Router, please ask your DSL/Cable Modem Service Provider the following questions: · Do I have a PPPoE (where you must provide a user name and password to get connected), Dynamic IP, PPtP or a Fixed IP Account? [. . . ] Remove the cable coming from the PC to the DSL/Cable Modem and insert into the e3000's connector labeled "1" while remaining connected to the PC. Using the cable shipped with the Bullet Router, connect the Bullet Router to the DSL or Cable Modem. Insert one end of the cable to the Bullet Router's connector labeled "WAN" and other end to the DSL/Cable Modem, from where you just remove a cable (Step 3. ) Step 5. Make sure the Bullet Router and the DSL/Cable Modem are on, and then reboot your PC.
STEP 2 Configure the e3000
1. Open a browser on your computer and enter http://192. 168. 1. 1 in the Address.
2. Then login the Sharing Router system with no password (by default, there is no password). Basic Setup page is as follows:
Press [Setup Wizard] button to setup
A. Setup Time Zone
1. Set the time zone for the Sharing Router. This information is used for log entries and client filtering. 2. Press[Next]button to continue.
B. Setup WAN Type
Specify the WAN connection type required by your Internet Service Provider. Specify a Cable modem (Dynamic IP), Fixed-IP xDSL, PPPoE xDSL, or PPTP.
C. Setup DNS
1. Domain Name Servers are used to map an IP address to the equivalent domain name. [. . . ] (If your WAN IP, Subnet Mask, and Gateway are 0. 0. 0. 0 then see instructions to reset your router. ) [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE UMAX E3000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual UMAX E3000 will begin.
