User manual UNI-T DT 832

[. . . ] Windows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are trademarks of Microsoft Corp. Apple and Mac OS are registered trademarks of Apple Inc. Other products may be trademarks or registered trademarks of their respective manufacturers. Trademarks Safety Instructions and Approval Safety Instructions Read the installation guide thoroughly before you set up the router. The router is a complicated electronic unit that may be repaired only be authorized and qualified personnel. [. . . ] It means that the public IP address assigned to your router changes each time you access the Internet. The Dynamic DNS feature lets you assign a domain name to a dynamic WAN IP address. It allows the router to update its online WAN IP address mappings on the specified Dynamic DNS server. Once the router is online, you will be able to use the registered domain name to access the router or internal virtual servers from the Internet. It is particularly helpful if you host a web server, FTP server, or other server behind the router. Before you use the Dynamic DNS feature, you have to apply for free DDNS service to the DDNS service providers. The router provides up to three accounts from three different DDNS service providers. Basically, Vigor routers are compatible with the DDNS services supplied by most popular DDNS service providers such as www. dyndns. org, www. no-ip. com, www. dtdns. com, www. changeip. com, www. dynamic- nameserver. com. You should visit their websites to register your own domain name for the router. Enable the Function and Add a Dynamic DNS Account 1. Assume you have a registered domain name from the DDNS provider, say hostname. dyndns. org, and an account with username: test and password: test. You have to set your time before set schedule. In System Maintenance>> Time and Date menu, press Inquire Time button to set the Vigor router's clock to current time of your PC. The clock will reset once if you power down or reset the router. You can inquiry an NTP server (a time server) on the Internet to synchronize the router's clock. This method can only be applied when the WAN connection has been built up. Set to Factory Default Index Status Clear all profiles and recover to factory settings. Click the number below Index to access into the setting page of schedule. Display if this schedule setting is active or inactive. You can set up to 15 schedules. Then you can apply them to your Internet Access or VPN and Remote Access >> LAN-to-LAN settings. To add a schedule, please click any index, say Index No. The detailed settings of the call schedule with index 1 are shown below. Vigor2820 Series User's Guide 121 Enable Schedule Setup Start Date (yyyy-mm-dd) Start Time (hh:mm) Duration Time (hh:mm) Action Check to enable the schedule. Specify the starting date of the schedule. [. . . ] Double click on the current used MacOs on the desktop. Open the Application folder and get into Utilities. Type ping 192. 168. 1. 1 and press [Enter]. It the link is OK, the line of "64 bytes from 192. 168. 1. 1: icmp_seq=0 ttl=255 time=xxxx ms" will appear. 256 Vigor2820 Series User's Guide 5. 4 Checking If the ISP Settings are OK or Not Click WAN>> Internet Access and then check whether the ISP settings are set correctly. [. . . ]