User manual UNIDEN 1660 OWNERS GUIDE

[. . . ] You have purchased one of the most sophisticated and versatile cordless telephone systems available. To enjoy the best performance from the UNIT's many features, please read this Owner's Guide carefully and save it for future reference. INTRODUCTION TO YOUR MULTI-HANDSET SYSTEM TELEPHONE The unit is different from conventional cordless telephones. The base unit, when connected to AC power and a telephone line, can support the operation of up to eight handsets. You can now place a fully featured cordless handset anywhere in you home or office that you have AC power to connect the handset chargers. [. . . ] The Repeat Counter is located in the upper right side of the display. The number displayed in the Repeat Counter indicates how many times the repeat caller called that day. For example, if a Caller ID record displays a Repeat count of "3", this indicates that the caller called 3 times that day. MISSING CALLER ID DATA If a caller chooses to partially or completely "block" Caller ID information, a message will appear on the display indicating that the name and/or phone has been blocked. The call will display as a Caller ID record, showing time and date information, and the message "PRIVATE". Other messages that might appear to indicate missing Caller ID data, are "Out of Area", "No Number" or "No Name". These messages indicate that complete Caller ID data was not sent. 1 2 3 4 Press CID to enter the Caller ID database. The LCD will display the number of CID records: #02 AUG06 *02 14:43 ALL CID: 23 Press v to view the most recent record. The first display screen will show the name and the phone number, if available. CALL WAITING CALLER ID If you subscribe to Call Waiting Caller ID (combined service), you will receive Caller ID information (if available) from Call Waiting calls. During a phone call, you will hear a beep to indicate the presence of a Call Waiting call. Shortly afterward, the Caller ID information will appear on the handset LCD. You can then choose to answer the call, by pressing FLS, or let the incoming call continue to ring. JACOBS SHAWN 5552174 Press MUTE to toggle to the second display screen, which will show the record number, the time and date of the call, and the Repeat counter (see "Repeat Counter" section). CALLER ID DISPLAY If you have subscribed to Caller ID service from your telephone company, each handset's display will show the telephone number and the name of the incoming call (if available), as well as the date and time the call is received. The information will display on the LCD while the phone is ringing (after the first ring), and is then stored in the unit's Caller ID database. #16 JUL21 *03 08:45 #12 JUL18 *00 15:35 NOTE: s You will never see a Repeat count of "1", because a call is not considered a Repeat until the caller has called twice. A Repeat count of "0" indicates that the Caller ID record is not a repeat call because the caller only called one time. PAGE PAGE 18 CALLER ID OPERATION (CONT. ) DIAL A CALLER ID RECORD DELETING ALL CALLER ID RECORDS Press CID to enter the Caller ID database. Press v or w to scroll to the desired Caller ID record. Press either of the TALK buttons (q or ). The unit will automatically dial the number. DIRECTORY OPERATION The unit allows you to store up to 80 names and numbers in an alphabetical phone Directory. 19 5 1 2 3 4 1 CID. 2 DEL FCN Press CID". The display will read "All STORING A DIRECTORY RECORD You may create a new Directory record or you may copy a Caller ID record into the Directory. Press ( will display to indicate "function" mode), and then press ("1"). The display will ask for confirmation that you wish to delete all of the records. To add a 2 second pause to a Directory dialing sequence (for example, to add a delay between dialing a phone number and dialing a password or menu choice), press FCN and then press PAUSE ("7"). The letter "P" will display to indicate the placement of the pause. Add as many 2 second pauses as neccessary. Press PRG again to begin programming the phone number. Use the keypad to enter the desired phone number. [. . . ] If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. If the product has been dropped or the cabinet has been damaged. If the product exhibits a distinct change in performance. [. . . ]