User manual UNIDEN DECT 6035+1

[. . . ] DECT 6035 DECT 6035+1 Series DECT6035, 6035+1 OM. indb i 8/8/07 3:25:37 PM Table of Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Terminology Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Manual Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Selected option appears in the display for two seconds, and then the display returns to normal. Finding a Lost Handset To locate a misplaced handset, press [find hs] on the base when the phone is in standby. The handsets connected to the paging base will beep for one minute, and PAGING appears on the handset display. To cancel paging, press [find hs] again or any key on the found handset. Note: Handsets that are not currently connected to this base will not be paged. Using Hold, Conference and Transfer Placing a Call on Hold 1) During a call, press [Clear/Int'com] on the handset to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold. 2) To return to the party on hold, press [ /Flash] or [ ] on a handset. The phone will return to the holding party. Notes: · You can only place a caller on hold for five minutes. Once five minutes has passed, that party's line will be disconnected and the phone will return to standby. · While a call is on hold, Caller ID and Call Waiting cannot be received. 33 DECT6035, 6035+1 OM. indb 33 8/8/07 3:25:44 PM Conferencing If you have more than one handset, up to three people can participate in a conference call. A three-way conference call consists of an outside line and two handsets. You can easily join a call already in progress. The handsets must be currently connected to the same base (see page 21). 1) Press [ /Flash] or [ ] to join the call. 2) To hang up, return the handset to the cradle or press [ ]. The other party will still be connected to the call. Transferring a Call You can transfer a call from one handset to another. The handsets must be currently connected to the same base (see page 21). 1) During a call, press [Clear/Int'com]. 2) Use [ ] or [ ] to select the handset you want to transfer the call to, and then press [Menu/Select]. The call will automatically be placed on hold, and a paging tone sounds. To cancel the transfer, press [ /Flash] or [ ]. 3) When another handset accepts the transferred call, you will be disconnected. [. . . ] The answering system announces the number of messages stored in memory and the voice prompts. To quit, hang up the phone. Turn on the answering system remotely 1. Call your phone and let it ring 15 times until you hear a beep. Press # then 5 to stop the announcement. [. . . ]