User manual UNIDEN DECT1060-2

[. . . ] Welcome Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. Accessibility Uniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden's products can accommodate persons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314. [. . . ] If the handset registers to the base successfully, you will hear a confirmation tone. 7 Press to exit and return to standby. [28] Base PIN code You need to enter the base PIN code when you are registering handsets. For security reasons you may wish to change the PIN code. You can choose a PIN code up to 4 digits long. If you reset the base from the handset, base PIN code will be 0000. Always keep a record of your base PIN code. Note your PIN code and keep it in a safe place. If you change the PIN code you will need to use the new code for any handset registered to your base. 1 Press to access the main menu. Selecting a base You can register a handset to up to 4 bases, e. g. one at work and one at home or one upstairs and one in the garage, and switch between them. Once your handset is registered with other bases, you can either specify the base you want to use or, select Automatic for your handset to choose the base with the strongest signal. 1 Press 2 Press Press 3 Press Press to access the main menu. to select Select Base. 2 Press or until Base Settings is displayed and press . to display Base Pin and 4 Press or to select Automatic or the base number. Press . 4 Enter a new PIN code (up to 4 digits) and press . 5 Press to exit and return to standby. [29] Resetting your phone If you reset your phone, both the base and handset will return to their default settings. The time, date, handset name, and phonebook will not return to default. If you have more than one handset registered to your base and you complete the following procedure, only the handset you reset and the base will go back to the default settings. For the base: 1 Press to access the main menu. 2 Press or until Base Settings is displayed and press . to select Yes and to For the handset: 1 Press to access the main menu. to select Reset Handset. 4 Press or to select Yes. [. . . ] Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone. " [50] One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 1 2 months after the date of original retail sale. [. . . ]