User manual UNIDEN DXAI 5588-2

[. . . ] Contents Welcome/Features Controls and Functions Terms Used in this Manual Accessibility Installing the Phone 3 4 6 6 7 Find Handset Using Call Waiting 21 22 Using the Speed Dial Memory Storing Names and Numbers in Speed Dial Memory Storing Caller ID Messages in Speed Dial Memory Making Calls from Speed Dial Memory Viewing the Caller ID Message List Deleting Information from the Caller ID List Making a Call from the Caller ID List Caller ID on Call Waiting (CIDCW) 23 23 26 27 29 30 31 31 A. Install the Rechargeable Battery Packs into the Handsets 8 C. Connect the Main Base and Charging Cradle, and Charge the Handsets 9 D. Mount the Main Base on a Wall 11 Installing the Beltclip 12 Headset Installation 13 Caller ID and CIDCW (Caller ID on Call Waiting) 28 Register Handsets to the Main Base before Using! [. . . ] The numbers [ ]- [ ] are displayed on the main base indicating the volume levels. [ ] being the softest and [ ] being the loudest. Turning the Answering System On/Off To turn the answering system on, press the key. The system will announce "Answering system is on. " The current greeting message will be played, and you will hear a confirmation tone. The message counter displays the number of messages stored in memory. If the display flashes, then there are new messages waiting for you. To turn the answering system off, press the key again. After the announcement "Answering system is off, " the message counter display will no longer be illuminated. www. uniden. com SETTING UP YOUR ANSWERING SYSTEM [ 41 ] Using Your Answering System The message counter displays the number of messages stored in memory. If the display flashes, new messages waiting for you. The flashing number represents the number of new messages, not total messages. The cordless phone plays your new messages first; after all the new messages are played, you can play the old messages. When the answering system is full, [ ] is displayed on the main base, and the system announces "No remaining time. " You should delete some messages so that the system can record new messages. (Refer to "Deleting a Message" on page 44. ) To stop playing your messages, press the key again at any time. Playing Your Messages 1) With the phone in standby mode, press the key. The system announces the number of new and old messages. The LED displays the number of new messages, and the number flashes. The day and time that each message was received is announced after the message is played. 2) When all new messages have been played, you hear a confirmation tone and an announcement "End of messages. " The message counter displays the total number of stored messages, and the system returns to standby. [ 42 ] USING YOUR ANSWERING SYSTEM www. uniden. com 3) After you have reviewed your new messages, you can play your old messages by pressing the key again. Once you have listened to a new message, it becomes an old message. The old messages will be played in the order in which they were received. Repeating a Message 1) With the phone in standby mode, press the number of stored messages are announced. The USING YOUR ANSWERING SYSTEM 2) To repeat the current message, press the (repeat/rew) key while the message is playing. To quickly scroll backwards through a message, press and hold the (repeat/rew) key. 3) To go back to the previous message, press the message begins playing. Each time you press the skips back one message. 4) Press the (repeat/rew) key as soon as a (repeat/rew) key, the system key at any time to stop reviewing messages and return to standby. Skipping a Message 1) With the phone in standby mode, press the number of messages is announced. [. . . ] Call your phone number from a touch-tone phone. During the outgoing message, press 0 and enter your PIN code. The answering system announces the number of messages stored in memory and the help guidance. The phone stands by for you to enter a command. [. . . ]