User manual UNIDEN DXAI3288-2

[. . . ] Step 1 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. ·Base unit (1) ·Handset (2) ·Charging cradle (1) ·AC adapter (2) ·Rechargeable battery (2) ·Telephone cord (1) ·Wall mount adapter (1) ·Beltclip (2) ·This Owner's Manual ·Other Printed Material Uniden Parts Department at (800) 554-3988 Hours: M-F 8:00 a. m. We can also be reached on the web at www. uniden. com D Plug the AC adapter cord into the base unit and charging cradle and then into a 120V AC outlet. Step 4 Before Using, Register Second Handset to Base After fully charging the handsets, remove the handset from the charging cradle and place it on the base. [. . . ] You hear a confirmation tone, then the announcement "Ring time" and the new ring time is announced. After a few seconds, the system announces "To set record time, press menu again". [ 42 ] THE INTEGRATED ANSWERING DEVICE www. uniden. com Selecting the Message Record Time You have three record time options. The options "1 minute" or "4 minutes" sets the duration for recording the incoming messages. "Announce only" answers the call with the preset greeting or your personal greeting but prevents the caller from leaving a message. 1) Press the clock/menu key four times in standby mode. You hear "Record time" and the current recording time ([ ] 1 minute, [ ] 4 minutes, [ ] Announce only, No recording), and it is displayed on the base. Then you hear the guidance for setting the record time. 2) Press the select/volume or key until the desired time appears. After setting the Announce only feature, you may want to change your outgoing message not to prompt the caller to leave a message. However, the prerecorded message changes automatically. 3) Press the set key to select the new recording time. You hear a confirmation tone, then the announcement "Record time" and the new recording time is announced. After a few seconds, the system announces "To set message alert, press menu again". M Announce only feature The announce only feature plays a prerecorded outgoing message "Hello, no one is available to take your call. Please call again. ", and it will not allow the caller to leave a message. To set "Announce only", follow the steps above. THE INTEGRATED ANSWERING DEVICE To scroll between the prerecorded message or your own personal greeting, press the greeting key when the outgoing message is played. If you want to use your own greeting, or want to omit the prompt "to leave a message from your greeting". Refer to "Recording a personal outgoing message" (Greeting) on page 45. www. uniden. com THE INTEGRATED ANSWERING DEVICE [ 43 ] Setting the Message Alert tone Message Alert feature lets you know you have new messages by sounding a short beeping tone. If you set the Message Alert to On and when a new message is received, the alert tone will sound every 15 seconds. 1) Press the clock/menu key five times in standby mode. You hear "Message alert" and the current setting ([ ] Off or [ ] On), and it is displayed on the base. Then you hear the guidance for setting the message alert. 2) Press the select/volume or key to make your selection. 3) Press the set key to select the new setting. [. . . ] The phone stands by for you to enter a command. To quit, hang up the phone. Turn on the answering system remotely 1. Call your phone and let it ring 10 times until it answers. Press 0 then 5 to stop the announcement. [. . . ]