User manual UNIDEN DXAI7288-2

[. . . ] DXAI 7288-2 Contents Welcome/Features Controls and Functions Terms Used in this Manual Getting Started Installing the Phone A. Install the Rechargeable Battery Packs into the Handsets C. Connect the Main Base and Charging Cradle, and Charge the Handsets D. Mount the Main Base on a Wall Installing the Beltclip Headset Installation Register Handsets to the Main Base before Using! [. . . ] Then press the greeting key again while the outgoing message is played. This switches between the prerecorded greeting and the personal greeting. After finishing playing back the message, a confirmation tone is heard. To delete the personal Greeting, press the (delete) key during the announcement and the system announces "Greeting has been deleted. " T H E I N TE G R ATE D ANSWERING DEVICE [41] THE INTEGRATED ANSWERING DEVICE www. uniden. com Setting the main base Ringer Volume You will hear three ringer options. You can change the ringer volume while in standby mode or the incoming call is ringing. You hear the ringer at the current volume level ([ ] high, [ ] low, [ ] off) (if you set the main base ringer volume to off, "Ringer off " is announced) and it is displayed on the main base. 2) Press the ringer key repeatedly until the desired ringer option appears. 3) The system displays the new ringer volume. note Although you have set the main base ringer to off, you will still hear the ringer from the handset on the main base if its ringer is on. Temporarily Mute the main base Ringer and Call Screen Press the (play/stop) key to temporarily mute the incoming ring and call screen. The ringer will sound with the next incoming call. To turn the ringer back on for this call, press the ringer key. To hear the answering machine and screen this call, press the or /volume/select key. TH E I N T EG R AT ED ANSWERING DEVICE Adjusting the Speaker Volume Level You can adjust the volume of the main base speaker by pressing the or /volume/select key on the main base. Press the /volume/select key for louder or the /volume/select key for softer while the main base speaker is being used except for menu mode. The numbers [ ] -[ ] are displayed on the main base indicating the volume levels. [ ] being the softest and [ ] being the loudest. www. uniden. com THE INTEGRATED ANSWERING DEVICE [42] Using Your Answering System The message counter displays the number of messages stored in memory. If the display flashes, new messages are waiting for you. The flashing number represents the number of new messages, not total messages. The cordless phone plays the new messages first; after all the new messages are played, you can play the old messages. When the answering system is full, [ ] is displayed on the main base, and the system announces "No remaining time. " You should delete some messages so that the system can record new messages. (Refer to "Deleting a Message" on page 46. ) Playing Your Messages hint To stop playing your messages, press the (play/stop) key again at any time. 1) With the phone in standby mode, press the (play/ stop) key. The system announces the number of new and old messages. The LED displays the number of new messages, and the number flashes. The day and time that each message was received is announced after the message is played. The message counter displays the number of current messages stored. 2) When all new messages have been played, you hear a confirmation tone and an announcement "End of messages. " The system returns to standby. T H E I N TE G R ATE D ANSWERING DEVICE [43] THE INTEGRATED ANSWERING DEVICE www. uniden. com 3) After you have reviewed your new messages, you can play your old messages by pressing the (play/stop) key again. [. . . ] 27 Storing names and numbers in speed dial memory . 60 www. uniden. com ADDITIONAL INFORMATION [62] Memo [63] www. uniden. com Remote Operation Card CUT CUT REMOTE OPERATION CARD Remote access away from home 1. Call your phone number from a touch-tone phone. During the outgoing message, press 0 and enter your PIN code. [. . . ]