User manual UNIDEN DXI7286-2

[. . . ] Contents Welcome/Features Controls and Functions Terms Used in this Manual Getting Started 2 3 4 5 Selecting a Different Channel Find Handset Using Call Waiting Voice Mail Waiting Indicator 19 20 20 21 Installing the Phone 5 A. Install the Rechargeable Battery Packs into the Handsets 6 C. Connect the Main Base and Charging Cradle, and Charge the Handsets 7 D. Mount the Main Base on a Wall 8 Installing the Beltclip 9 Headset Installation 10 Register Handsets to the Main Base before Using! [. . . ] 3) Press the end key to return to standby mode. C A L LE R I D F E AT UR ES [29] CALLER ID FEATURES www. uniden. com Deleting Information from the Caller ID List The cordless phone stores up to 30 Caller ID names/numbers in each handset. If the phone receives the 31st Caller ID, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually. note ·While using the Delete All?screen, if no key is pressed for more than 30 seconds, an error tone sounds, and the handset returns to standby mode. ·If you get an incoming call or page, the deleting operation is canceled, and you can answer the call or page. Deleting a Caller ID message 1) Press the caller id/menu key in standby mode. Find the message to be deleted from the Caller ID list by pressing the /vol/ or /vol/ key. 3) Press the /vol/ or /vol/ press the select/channel key. key to select Yes, C AL L E R I D FE AT U R E S and then Deleting all Caller ID names/numbers 1) With the phone in standby mode, press the caller id/menu key. 3) Press the /vol/ or /vol/ key to select Yes, and then press the select/channel key. You hear a confirmation tone and all stored Caller ID messages are deleted. www. uniden. com CALLER ID FEATURES [30] Making a Call from the Caller ID List note You cannot make a call from the Caller ID list if your cordless phone is connected to a private branch exchange (PBX). You can place a call from the Caller ID list. 1) Press the caller id/menu key in standby mode. Select the phone number that you want to dial by pressing the /vol/ or / vol/ key. 2) To have the phone dial a "1" before the displayed Caller ID number, press 1. To have the phone dial the stored area code before the displayed Caller ID number, press 3. C A L LE R I D F E AT UR ES 3) Press the talk/flash key. The displayed phone number dials automatically. [31] CALLER ID FEATURES www. uniden. com Changing the Digital Security Code To protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides AutoSecureTM (which electrically locks your phone when each handset is in the cradle) and Random CodeTM digital security which automatically selects one of over 262, 000 digital security codes for each handset and the main base. If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. Press and hold the find handset key on the main base. 2) While holding the find handset key, place the handset in the main base, and leave the handset in the main base for more than three seconds. 3) Remove the handset from the main base. Then place the second handset in the main base and wait for more than three seconds. [. . . ] The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd. Fort Worth, TX 76155 (800) 297-1023, 8 a. m. CST, Monday through Friday or visit our website at www. uniden. com [41] ADDITIONAL INFORMATION www. uniden. com A DD I T I O N AL I N F O R M AT I O N I. C. Notice TERMINAL EQUIPMENT NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. [. . . ]