User manual UNIDEN EXA2955 INSTRUCTION MANUAL

[. . . ] Cordless Telephone with Answering System Instruction Manual 900 MHz EXA2955 Precautions! Before you read anything else, please observe the following: Warning!Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning · This equipment contains a rechargeable nickel-cadmium battery. [. . . ] The IN USE LED and the TALK/BATT LOW LED on the handset will flash slowly. TALK or pick up the handset from the base phone. The IN USE LED and the TALK/BATT LOW LED on the handset will light up. 2 Press TALK/BATT LOW LED Telephone Features 3 When you are done talking, OFF press OFF or replace the handset to the base phone. TALK Notes · If you pick up the handset while talking through the speakerphone on the base phone, the call will be switched to the handset. · If you do not press HOLD in step 1, and press TALK in step 2, you can make a three-way conversation (see "Having a three-way conference" on page 31). · When the call is put on hold on the base phone, if you pick up the handset, the call will be switched to the handset. continued Telephone Features 25 Switching the phones during a call (continued) To switch from the handset to the base phone 1 Press TALK/BATT LOW LED HOLD on the handset. The TALK/BATT LOW LED and the IN USE LED on the base phone will flash slowly. 2 Press . The SPEAKER LED on the base phone will light up. The TALK/BATT LOW LED will flash. SPEAKER 3 When you are done talking, press SPEAKER again. IN USE LED SPEAKER LED SPEAKER 26 Telephone Features Talking between the handset and the base phone (Intercom) You can talk between the base phone and the handset. You can start the intercom from either phone. To talk from the handset to the base phone TALK/BATT LOW LED Press INTERCOM on the handset. The TALK/BATT LOW LED lights up, and INTERCOM LED on the base flashes. You will be connected automatically after 3 seconds. When a person at the base phone answers, you can talk. The IN USE LED on the base and the TALK/BATT LOW LED on the handset will light up. The INTERCOM LED on the base will light up. When you are done talking or if no one answers the phone, Press OFF . TALK OFF Telephone Features Tips · You can receive an intercom call on the base phone even when the RINGER switch on the base phone is set to OFF. The base phone will ring at a low level. · When a person at the base phone want to answer the intercom call within 3 seconds, press INTERCOM on the base phone. If a person at the base phone press INTERCOM after the intercom call is automatically connected, the intercom call will be disconnected. continued Telephone Features 27 Talking between the handset and the base phone (Intercom) (continued) To talk from the base phone to the handset Press INTERCOM on the base phone. When the person at the handset presses INTERCOM , you can talk. The call to the handset will stop by pressing OFF on the handset. The IN USE LED on the base and the TALK/BATT LOW LED on the handset will light up. The INTERCOM LED on the base phone will light up. [. . . ] If you have any questions or problems concerning your phone, please call our customer hotline at 1-800-297-1023. 50 Additional Information Specifications General Frequency band 902 - 928 MHz Operating channel 40 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 7. Base phone Power source DC 9V from AC power adapter AD-314 Dimensions Approx. 170 x 65 x 220 mm (w/h/d), antenna excluded (approx. 6 3/4 x 2 5/8 x 8 3/4 inches) Antenna: Approx. 1 lb 5 oz), wall bracket excluded Handset Power source Rechargeable battery pack BT-905 Battery charging time Approx. [. . . ]