User manual UNIDEN EXAI3248

[. . . ] Step 1 Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. ·Base unit ·Wall mount ·Handset adapter ·AC adapter ·Beltclip ·Rechargeable ·This Owner's battery Manual ·Telephone cord ·Other Printed Material Uniden Parts Department at (800) 554-3988 Hours: M-F 8:00 a. m. We can also be reached on the web at www. uniden. com D Plug the AC adapter cord into the base unit and then into a 120V AC outlet. Step 4 Setting Display Options Step 5 Set Answering System To turn the answering system on, press the answer on/off key. [. . . ] If you want to use your own greeting, or want to omit the prompt "to leave a message from your greeting". Refer to "Recording a personal outgoing message" (Greeting) on page 43. THE INTEGRATED ANSWERING DEVICE www. uniden. com THE INTEGRATED ANSWERING DEVICE [ 41 ] Setting the Message Alert tone Message Alert feature lets you know you have new messages by sounding a short beeping tone. If you set the Message Alert to On and when a new message is received, the alert tone will sound every 15 seconds. 1) Press the clock/menu key five times in standby mode. You hear "Message alert" and the current setting ([ ] Off or [ ] On), and it is displayed on the base. Then you hear the guidance for setting the Message Alert. 2) Press the select/volume or key to make your selection. 3) Press the set key to select the new setting. You hear a confirmation tone, then the announcement "Message alert" and the current setting you have selected is announced. After a few seconds, the system announces "To set language, press menu again". When the first new message is received, the alert tone will begin to sound. Turning the Message Alert tone Off by pressing any key. 1) To quickly turn Message Alert tone off, press any key on the base unit and the tone will automatically deactivate. To reset, go back into the menu setup mode (steps 1 - 3 above. ) Turning Message Alert tone Off when you're away from your phone. 1) When all new messages are played back using the remote playback feature (see page 49) the Message Alert tone will automatically deactivate. The tone will not deactivate until all messages are played back. [ 42 ] THE INTEGRATED ANSWERING DEVICE www. uniden. com Selecting the Language The answering system voice announcements can be heard in English or French. To choose the language of the answering system voice announcements: 1) Press the clock/menu key six times in standby mode. You hear the announcement "Language, English" followed by the guidance for setting the language. The current setting (" " or " ") appears on the base. 2) Press the select/volume or key to select the desired language. A confirmation tone is heard along with the setting in the language selected. Setting Your Outgoing Message (Greeting) When you receive a call, the answering system automatically plays either a preset message or your own greeting. M Preset message The following message is prerecorded: "Hello, no one is available to take your call. [. . . ] The phone stands by for you to enter a command. To quit, hang up the phone. Turn on the answering system remotely 1. Call your phone and let it ring 10 times until it answers. Press 0 then 5 to stop the announcement. [. . . ]