User manual UNIDEN EXAI6980

[. . . ] Cordless Telephone EXAI 6980 Owner's Manual Thank you for your purchase of the Uniden EXAI 6980 cordless telephone. Please read this Owner's Manual carefully before using your cordless telephone to ensure proper use. After reading the manual, please keep it in a safe place and refer to it when necessary. ©2000 Uniden America Corporation Introduction Thank you for choosing the Uniden EXAI 6980 cordless telephone. [. . . ] Pressing again will cancel the long distance call setting. Notes · "End" appears when you have reviewed all messages in the Caller ID list. · Each message can be up to 16 characters for the phone number and the name. 28 Caller ID Features (continued) Deleting information from the Caller ID list The EXAI 6980 stores up to 30 Caller ID messages. If more new calls are received, messages stored in the list are deleted beginning with the oldest message in the list. Data can also be deleted manually. Deleting a Caller ID message 1 2 Press . Press or to select the message that you would like to delete. (See page 28. ) 3 4 Press , while the summary screen is displayed. Press or "Yes" or "No". to select 5 Press or . When the pointer is at "Yes": A tone sounds and the next Caller ID message is displayed. When the pointer is at "No": The display returns to the Caller ID display. Notes · While using the "Delete Message ?" screen, if no key is pressed for more than 20 seconds, an error tone sounds and the telephone returns to standby. · If you get an incoming call, the deleting operation is canceled and the telephone returns to standby so you can answer the call. 29 Caller ID Features (continued) Deleting all Caller ID names/numbers 1 Press . 2 3 Press , while the summary screen is displayed. Press or "Yes" or "No". to select 4 Press or . When the pointer is at "Yes": A tone sounds and all stored Caller ID messages are deleted. When the pointer is at "No": The display returns to the summary screen. Notes · While using the "Delete All ?" screen, if no key is pressed for more than 20 seconds, an error tone sounds and the telephone returns to standby. · If you get an incoming call, the deleting operation is canceled and the telephone returns to standby so you can answer the call. 30 Caller ID Features (continued) Calling a party from the Caller ID list You can place a call from the Caller ID list. The EXAI 6980 stores up to 30 messages. 1 2 Press . Press or to select the phone number that you want to dial. (See page 28. ) 3 Press . The displayed phone number dials automatically. Long Distance calls Pressing while the incoming call information is displayed (in step 2) will place a "1" in front of the number for long distance calling. Press again to remove the "1". Notes · When a long distance call has been set, "1" appears in the display. · You cannot make a call from the Caller ID list, if your EXAI 6980 is connected to private branch exchange (PBX). 31 Caller ID Features (continued) Storing Caller ID messages in Memory Messages shown in the Caller ID list can be stored for memory dialing. Using the incoming call information (i. e. , Caller ID list), the phone number of the party on the Caller ID list can be stored in memory dialing. 1 2 Press . Display the phone number to be stored from the Caller ID list. (See page 28. ) 3 4 Press . Press or to select the memory location where you wish to store the name and number from the Caller ID list. Press the number keypad ( to ) and select the number (0-9). The number is stored in memory, and the display returns to the Caller ID list. 5 Notes · If a message has already been stored in the selected memory location, a verification screen is displayed. The display returns to the Caller ID list. [. . . ] · Disconnect the AC adapter for a few minutes, then reconnect it. · Reset the digital security code (See page 46). Charge the battery on the base unit for 12-15 hours. · The handset may be too far away from the base unit. [. . . ]