User manual UNIDEN EXI 4246

[. . . ] EXI 4246 EXI4246 Step 1 Check the Package Contents Make sure your cordless phone's packaging includes the following items. Step 3 Set up the Base Plug the AC adapter cord to the DC IN 9V jack (yellow) . Route the cord. Step 5 Connect to the Phone Line Plug one end of the telephone cord into the base TEL LINE jack. Additional Features For more information on these and other features, please refer to your Owner's Manual. For your convenience, listed below are important features that will help you set up your new cordless phone. Base Handset AC adapter QUICK REFERENCE GUIDE Belt Clip Rechargeable Telephone battery cord Also included: · Owner's manual Plug the other end into the telephone wall jack. Step 6 Make & Receive Calls Plug the AC adapter to a 120V AC power outlet. Note Use ONLY the Uniden AC adapter supplied with your new phone! Step 2 Install Handset Battery Pack and Charge Note Use ONLY the Uniden rechargeable battery pack supplied with your new phone! Remove the cover. Step 4 Charge the Handset Place the handset in the base. Make sure that charge LED illuminates. To Make a Call Press talk/flash . To Receive a Call Pick up the handset and press talk/flash . Handset/Base Set up: - Adjust the Earpiece Volume P. 19 - Set the Ringer Volume P. 17 - Set Tone/Pulse Dialing P. 16 Caller ID: Set Caller ID on Call Waiting (CIDCW) P. 14 Note: You must subscribe to Caller ID services through your local telephone provider to use Caller ID and CIDCW. Connect the battery pack with the correct polarity. Replace the cover. Charge the handset 15-20 hours. Fully charge the battery pack by placing the handset in the base before using phone. To Hang Up a Call Press end or return the handset to the base. Refer to your Owner's Manual for detailed operations. [. . . ] 2) Use the /vol/ key to scroll through the messages from the latest to the earliest, or use the /vol/ key to scroll through the messages from the earliest to the latest. 3) Press the call id/menu key to return to talk mode, or press the end key to return to standby mode. note ·In Caller ID operation, if no key is pressed for more than 30 seconds, an error tone sounds and the telephone returns to standby mode. ·Each message can be up to 15 characters for the name and 15 digits for the phone number. ·The number of calls from the same Caller ID appears next to the received time. Once you view the new message, the number will be cleared and disappear. ·During a call, don't press the end key, or the call will be disconnected. CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) www. uniden. com CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) [29] Deleting Information from the Caller ID List note ·While using the Delete All?screen, if no key is pressed for more than 30 seconds, an error tone sounds, and the handset returns to standby mode. ·If you get an incoming call or page, the deleting operation is canceled, and you can answer the call or page. If the phone receives more Caller ID messages than it can store, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually. Deleting a Caller ID message 1) Press the call id/menu key in standby mode. Find the message to be deleted from the Caller ID list by pressing the /vol/ or /vol/ key. CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) 2) Press the delete/chan key. 3) Press the /vol/ or press the select key. /vol/ key to select Yes, and then Deleting all Caller ID names/numbers 1) With the phone in standby mode, press the call id/menu key. 3) Press the /vol/ or /vol/ key to select Yes, and then press the select key. You hear a confirmation tone and all stored Caller ID messages are deleted. [30] CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) www. uniden. com Making a Call from the Caller ID List You can place a call from the Caller ID list. 1) Press the call id/menu key in standby mode. Select the phone number that you want to dial by pressing the /vol/ or / vol/ key. 2) To have the phone dial a 1 before the displayed Caller ID number, press 1. To have the phone dial the stored area code before the displayed Caller ID number, press 3. The displayed phone number dials automatically. note You cannot make a call from the Caller ID list if your cordless phone is connected to a private branch exchange (PBX). CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) Caller ID on Call Waiting (CIDCW) With CIDCW, you will hear a Call Waiting tone while you are on a call, and the Caller ID data is displayed. To accept the waiting call, press the talk/flash key (see page 21). www. uniden. com CALLER ID AND CIDCW (CALLER ID ON CALL WAITING) [31] Changing the Digital Security Code To protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides AutoSecureTM (which electrically locks your phone when the handset is in the base) and Random CodeTM digital security which automatically selects one of over 262, 000 digital security codes for the handset and base. If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged. [. . . ] Notice TERMINAL EQUIPMENT NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. [. . . ]