User manual UNIDEN EXI7246

[. . . ] EXI7246/EXI7246C Step 1 Checking the Package Contents Make sure your cordless phone's packaging includes the following items. Step 3 Set up the Base Plug the AC Adapter cord to the DC IN 9V jack (yellow) . Route the cord. Step 5 Connect to the Phone Line Plug one end of the telephone cord into the base TEL LINE jack. Additional Features For more information on these and other features, please refer to your Owner's Manual. For your convenience, listed below are important features that will help you set up your new cordless phone. Base Handset AC adapter Belt Clip QUICK REFERENCE GUIDE Wall mount Rechargeable Telephone adapter battery cord Also included: · Owner's manual Plug the other end into the telephone wall jack. Step 6 Make & Receive Calls Plug the AC Adapter to a 120V AC power outlet. Note Use ONLY the Uniden AC Adapter supplied with your new phone! Step 2 Install Handset Battery Pack and Charge Note Use ONLY the Uniden rechargeable battery pack supplied with your new phone! Remove the cover. Step 4 Charging the Handset Place the handset in the base. Make sure that charge LED illuminates. To Make a Call Press talk/flash . To Receive a Call Pick up the handset and press talk/flash . Handset/Base Set up: - Adjust the Earpiece Volume P. 18 - Set the Ringer Volume P. 16 - Set Tone/Pulse Dialing P. 15 Caller ID: Set Caller ID on Call Waiting (CIDCW) P. 13 Note: You must subscribe to Caller ID services through your local telephone provider to use Caller ID and CIDCW. Connect the battery pack with the correct polarity. Replace the cover. Charge the handset 15-20 hours. Fully charge the battery pack by placing the handset in the base before using phone. To Hang Up a Call Press end or return the handset to the base. Refer to your Owner's Manual for detailed operations. [. . . ] ·If you get an incoming call or page, the deleting operation is canceled, and you can answer the call or page. The cordless phone stores up to 30 Caller ID names/numbers. If the phone receives the 31st Caller ID, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually. Deleting a Caller ID message 1) Press the caller id/menu key in standby mode. Find the message to be deleted from the Caller ID list by pressing the /vol/ or /vol/ key. C A L LE R I D F EAT UR E S 2) Press the delete/channel key. 3) Press the /vol/ or press the select key. /vol/ key to select Yes, and then Deleting all Caller ID names/numbers 1) With the phone in standby mode, press the caller id/menu key. 3) Press the /vol/ or /vol/ key to select Yes, and then press the select key. You hear a confirmation tone and all stored Caller ID messages are deleted. [30] CALLER ID FEATURES www. uniden. com Making a Call from the Caller ID List You can place a call from the Caller ID list. 1) Press the caller id/menu key in standby mode. Select the phone number that you want to dial by pressing the /vol/ or / vol/ key. 2) To have the phone dial a "1" before the displayed Caller ID number, press 1. To have the phone dial the stored area code before the displayed Caller ID number, press 3. The displayed phone number dials automatically. note You cannot make a call from the Caller ID list if your cordless phone is connected to a private branch exchange (PBX). C A L LE R I D F EAT UR E S www. uniden. com CALLER ID FEATURES [31] Changing the Digital Security Code To protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides AutoSecureTM (which electrically locks your phone when the handset is in the base) and Random CodeTM digital security which automatically selects one of over 262, 000 digital security codes for the handset and base. If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. 1) Remove the handset from the base unit. Press and hold the find handset key on the base. 2) While holding the find handset key, place the handset in the base unit, and leave the handset in the base for more than 3 seconds. A new random security code is set. ADDIT IONAL INF O RMAT IO N [32] ADDITIONAL INFORMATION www. uniden. com Note on Power Sources Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, L ow Bat ter y appears on the LCD and none of the keys will operate. If the phone is in use, Lo w Bat ter y flashes and the handset beeps. [. . . ] The Product should be shipped freight prepaid, by traceable means, to warrantor at: Uniden America Corporation Parts and Service Division 4700 Amon Carter Blvd. Fort Worth, TX 76155 (800) 297-1023, 8 a. m. CST, Monday through Friday or visit our website at www. uniden. com [40] ADDITIONAL INFORMATION www. uniden. com I. C. Notice TERMINAL EQUIPMENT NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. [. . . ]