User manual UNIDEN EXI960

[. . . ] CONTENTS Important Safety Instructions . 19 Installing the Handset Battery Pack . 32 Using the Flash Key with Call Waiting . 36 Storing a Caller ID number in Dial Memory . [. . . ] Complete your call as quickly as possible. Return the Handset to the Base Unit for charging. None of the buttons will operate. The Handset beeps and the Battery icon flashes once every 3 seconds. Return the Handset to the Base Unit for charging. h Allow 15 to 20 hours without any interruption for the Handset to fully recharge. Cleaning the Battery Contacts To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit about once a month. Use a pencil eraser or Contacts other contact cleaner. Do not use any liquids or solvents. page /find status 23 Setting the Pulse/Tone Switch Be sure the PULSE/TONE switch is in the TONE position. PU LS E- TO N E h Most phone systems are Tone dialing. Check with your local phone company if you are not sure whether your system is Tone or Pulse dialing. Adjusting Ringer Controls h Please refer to the foldout in front of your operating guide for key positions. To adjust the ringer volume of your Handset, press vol/can until you hear the desired ringer tone and volume. Ring Type A High Ring Type A Low Ring Type B High Ring Type B Low To adjust the receiver volume, press vol/can while you are on a call. VOLUME HIGH VOLUME LOW 24 Automatic Digital Code Security To avoid unauthorized calls on your phone, a Digital Code feature was added to the EXI 960 phone. This Digital Code is shared only between the Handset and Base Unit. The Code is set automatically when you first use the phone. h Please refer to the foldout in front of your operating guide for key positions. To change the Digital Code, be sure the Handset is on the Base, then: 1. Press the page/find button on the Base Unit. pag e/fin d sta tus 3. Place the Handset back on the Base Unit while it's still beeping. talk caller id mem flash 1 4ghi 7pqrs tone 2abc 5 jkl 8tuv 3def 6mno 9wxyz 0oper function redial pause # channel delete volume redial page /find status 4. When the beeping stops, briefly remove the Handset again, and then return it to the Base Unit. 25 0oper 5. The Status LED on the Base Unit will blink to indicate that the Digital Security Code is set to one of the more than 65, 000 codes. function rdl/pause # chan/del vol/can page /find status h If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function. To reestablish communication between the Handset and Base Unit: 1. Place the Handset back on the Base Unit. The Status LED on the Base Unit will blink to indicate that the Digital Security Code is set. Entering the Local Area Code h h Please refer to the foldout in front of your operating guide for key positions. If you do noit press a key within 5 seconds, the Handset beeps and the phone returns to standby. You must enter your local area code for the Caller ID redial features to work properly. Press function twice. AREA CODE 1AREA CODE 1-817 3. A confirmation tone sounds and the display remains on for two seconds. STORING 6 CALLS 5. The Status icon on the Base Unit will blink to indicate that the area code is stored. Press function twice. AREA CODE 1-817 AREA CODE 1DELETING 1-817 3. A confirmation tone sounds and the display remains on for two seconds. 5. [. . . ] Battery Capacity 600mAh 3. 6V Talk Mode 7 hours Standby 14 days Mode Specifications, Features, and availability of Optional Accessories are all subject to change without prior notice. 42 PRECAUTIONS Before you read anything else, please observe the following: WARNING! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. RECHARGEABLE NICKEL-CADMIUM BATTERY WARNING s This equipment contains a Rechargeable Nickel-Cadmium Battery. s Cadmium is a chemical known to the State of California to cause cancer. s The Rechargeable Nickel-Cadmium Battery contained in this equipment may explode if disposed of in a fire. [. . . ]