User manual UNIDEN EXP7241

[. . . ] AutoTalkTM allows you to answer a call by just removing the handset from the base so you don't have to waste time pushing buttons. AutoStandbyTM allows you to hang up by simply returning the handset to the base. The UltraClear PlusTM true compander circuitry virtually eliminates background noise. This innovative technology, together with 20 different channels, provides you with the best possible reception during all your conversations. [. . . ] For optimum performance, be sure to return the handset to the base unit after each telephone call. · Dial mode setting, last number dialed and numbers stored in memory locations are retained for up to one minute while you replace the battery pack. Cleaning the battery charging contacts To maintain a good charge, clean the charging contacts on the handset once a month. To clean, dampen a cloth with plain water and gently rub the cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the base. Caution: Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish. Tone Dialing Switch-over If your telephone company requires pulse dialing, you can temporarily switch over to tone dialing after the call connects. This feature is useful when you need tone dialing to use any automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc. If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press [ /tone]. Any digits you enter from then on will be sent as tone dialing. Normally, setting the code is not necessary. · Check the dialing mode used by your telephone company. · The handset may be too far away from the base. · Move the base away from appliances or metal objects. · Change the digital security code. (see page 7. ) · Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. · Move the base to another location or turn off the source of interference. The handset doesn't ring or receive a page. Severe noise interference Liquid Damage Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps. Case If the handset or base is exposed to moisture or liquid, but it only affects the exterior plastic housing. If moisture or liquid has entered the plastic housing (i. e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base). Action Wipe off the liquid, and use as normal. Handset: 1. Remove the battery cover and leave it off for ventilation. [. . . ] The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Notice: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. [. . . ]